User Guide

Table Of Contents

LACING A CONFERENCE CALL

1. While on the first call, press . The call is now on hold.

2. Place an intercom or outside call, then press the flashing button to

place the call on hold. (If necessary, repeat this step to place a third call on

hold.)

3. Press the flashing button to join all of the calls together in the con-

ference.

NOTE: Conference calls are limited to three parties on SIP endpoints.

FORWARDING CALLS

1. Press . (Six-line display model users must then select a menu button.)

2. Do one of the following:

• To forward to an outside telephone number: Select an outside line

and dial a telephone number.

• To forward to an extension number: Dial the extension number.

• To forward to your voice mailbox: Dial the voice mail extension.

To cancel call forwarding:

1. Press .

2. If you have a six-line display endpoint, press the FWD OFF menu button.

If you have a non-display or two-line display endpoint, press , , or

lift and replace the handset.

RESPONDING TO A WAITING CALL

If you hear a “call waiting” tone through your handset or headset, either end

your current call or place it on hold. Then press , , , or the

flashing button.

CHANGING VOLUME LEVELS

EITHER, Press the high ( ) or low ( )end of the Volume button.

OR, Press the Up or Down arrow on the Volume button.

OR, Press the

VOL UP or VOL DN button.

To save your change:

EITHER, Press both ends of the Volume button at the same time.

OR, Press the middle of the Volume button.

OR, Press both

VOL UP and VOL DN buttons at the same time.

REDIALING A NUMBER

Select an outside line and press or dial . The number is auto-

matically dialed.

CNF

FWD

SPKR

SPKR ANSWER

REDIAL