User Guide

Figure 29. Pairing Successful

6. Your E30 or S30 thermostat has been added to Apple Homekit. You can

at this point assigned a location for the thermostat and include in your

favorites.

Additional Apple HomeKit Menu Options

There are several functions available from the HomeKit menu.

Figure 30. HomeKit Menu

Enter WAC Mode

This option is for changing to a new wireless access point or updating the

existing wireless access point password.

Auto WAC Mode

By default this option is set to ON. If the thermostat has never been connected

to the home’s wireless access point or a HomeKit Factory Reset was initiated.

Anytime the thermostat’s power is cycled or restarted, the Wi-Fi Accessory

Con guration (WAC) Active screen will always appear on thermostat boot-up.

Selecting OFF, will disable this function.

NOTE: The thermostat can be restarted by going to menu > settings >

advanced settings > restart and select restart smart hub or restart

both

HomeKit User Reset

This option allows you to remove any existing Apple HomeKit user settings and

paired iOS devices. The thermostat however will retain it’s Wi-Fi connection

settings. This option will only appear if the thermostat has already been added

to a user’s iCloud account.

HomeKit Factory Reset

This option allows you to remove any existing thermostat Wi-Fi settings, Apple

HomeKit user settings and paired iOS devices. Use this option if you wish to

remove the thermostat’s Wi-Fi settings and set the Apple HomeKit function

back to factory default.

Apply Firmware Update Now

If the button is visible, it indicates there is a  rmware update available. Select

the button to update the Apple HomeKit  rmware if you desire to do so. Once

started a pop-up will appear indicating that “Homekit  rmware update is in

progress. Please wait...”.

Figure 31. Firmware Update Progress Indicator