User Guide

24
3. Currently, you can pair only one home that is listed in your Lennox
iComfort Account with Alexa. In the situation where you have multiple
homes associated with your iComfort account, you will not have a choice
to choose the home for Alexa. You can check the homes on your account
by visiting:
Additional Help
To learn more, go to Lennox consumer web portal at:
http://support.integrationic3consumer.myicomfort.com/help/index.html
or
Amazon’s online help at https://alexa.amazon.com.
Google Home and Assistant
Download the Google Home app from Google Play or the App Store™ on a
compatible phone or tablet. Then follow the on-screen steps to nish setup.
Once you have added the thermostat to your Google Home app, then install
the Google Assistant app (Android and IOS) to enable voice control.
NOTE: Google Assistant app may be already installed on your Android device.
Perfect Temp and Schedule Mode Functions
Raising or lowering the temperature is not supported when using a schedule
or Perfect Temp feature. When attempting to change the temperature when
in either reference mode, Google Assistant will respond with “mode not
supported“.
Heat / Cool Mode (Auto-Changeover)
Although Google Assistant supports heat / cool mode temperature adjustments,
it will do so only by maintaining the currently established temperature ranged.
For example, if you set your heat set point to 60ºF and your cooling set point to
80ºF at the thermostat itself, then you have established a temperature range
of 20 degrees. Any adjustment using Google Assistant, either through the
app or by voice will maintain a 20 degree range differential as well. Let’s say
you change your heat set point to 65ºF. Now your thermostat will indicate the
heating is at 65ºF and cooling is set at 85ºF. Adjusting the cooling set point
will result in the range being maintained as well. In the Google Home app,
the thermostat image will only display the approximate center temperature
between the current heating and cooling set points. In this example it would
display 75ºF.
Additional Help
To learn more, go to either the Lennox consumer help at:
http://support.integrationic3consumer.myicomfort.com/help/index.html or
Google’s online help at g.co/home/help.
IFTTT
Download the IFTTT app from Google Play or the App Store™ on a compatible
phone or tablet. Then follow the on-screen stops to nish setup.
Additional Help
To learn more, go to the Lennox consumer web portal at:
http://www.support.lennoxicomfort.com/help/index.html or IFTTT’s online help
at: https://ifttt.com/about.
Control4
®
Smart Home | Operating System
Control4 is a leading control and automation platform which works with
thousands of smart devices integrating audio, video, lighting, security, intercom,
and climate control into a seamless customer experience
Control4 gives the customer an easy-to-use interface to control the iComfort
®
thermostat.
Settings include:
• Display all systems in the home and select a system
• Display all zones in the system and select a zone
• Turn system or zones on or off
• Change manual modes (heat, cool, off)
• Change heating/cooling setpoints for each zone/system
• Change fan mode (on, auto, circulate)
For additional information please visit the iComfort
®
Support Website for
Control4 Integration.
Apple HomeKit Integration
Apple
®
HomeKit™ technology provides an easy, secure way to control your
home’s lights, doors, thermostats, and more from your iPhone
®
, iPad
®
, iPod
touch
®
or Apple Watch
®
.
To control this HomeKit-enabled accessory, iOS 10.3.1 or later is recommended.
Controlling this HomeKit-enabled accessory automatically and away from
home requires an Apple TV
®
with tvOS 10.3 or later or an iPad with iOS 10.3
or later.
Apple, Apple Watch, iPad, iPad Air, iPhone and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries. HomeKit and HomePod
are trademarks of Apple Inc.