User Guide

20
To remove just one system, go to that system and navigate to menu > name
and select “unregistered system.”
NOTE: The move out function does not delete your account but just removes
all systems and addresses.
HomeKit
See section “Apple HomeKit Integration” on page 24 for information on how
to add your thermostat to Apple HomeKit.
Notications (Critical, Warnings and Reminders)
Table 5. Notication Types
Notication
Type
Color What it means
Critical Red
Indicates something has malfunctioned and needs immediate
attention. Contact your service technician.
Warnings Orange
Indicates an emerging or developing issues that will require
attention. One example is excessive run times. Contact your
service technician.
Reminders Yellow
Indicates lter, UVA light replacement or maintenance is
needed, based on run time or calendar schedule. See table
2 service codes.
Info Blue Indicates various system modes, for example away mode.
NOTE: Selecting the ALL option displays all of the above.
Table 6. Reminders (Service Alerts)
Number Reminder
3000 Filter 1
3001 Filter 2
3002 Humidier Pad
3003 UV Light
3004 Maintenance
3005 PureAir Maintenance
4001 User Wi-Fi state change, disable
4002 Firmware download failed
4003 Image le download failed
PureAir™ S (S30 Only Feature)
PureAir S is an air purication system that works only with the iComfort S30
Ultra Smart Thermostat and cleans the air in your home by addressing all three
types of indoor air pollutants an:
• Airborne particles (like pollen, dust and pet dander).
• Germs and bacteria.
• Chemical orders and vapors.
PureAir S uses a MERV 16 air lter, UVA light and catalyst to work.
PureAir S Home Screen Information
The current PureAir S status is located along the left side of the screen where
other system status indicators (air lter and UVA bulb) are located.
75
heat-to
73
cool-to
79
inside
sys-upstairs
Meli’s bedroom
7:28 pm
Wed | Sept 24 , 2015
away
4
60%
modes / schedules
heat / cool
outside
65
68º
48º
PureAir
60%
50%
filter
purifier
Figure 15. PureAir S Home Screen Status
Touching the PureAir status indicator will bring up a PureAir Performance
status screen.