User Guide

18
Language
This allows the language used on the screen to be changed. Options are
English, Français and Español. Default is English.
Display
The following setting options available are:
1. Outdoor Weather - Turn ON to display weather on the HOME screen.
2. Outdoor Temperature Display - Options are:
• Internet (AccuWeather) - Will display weather provided by
AccuWeather for the local area based on the homeowner zip code.
NOTE: Thermostat has to be connected to the Internet, system is registered,
and you are logged into www.lennoxicomfort.com for this feature to
work. See menu > system settings > account to verify.
• Sensor - Display outdoor temperature only from installed remote
outdoor sensor.
3. Outdoor Air Quality - Turn ON to display outdoor air quality on the
weather screen.
4. Indoor Humidity - Turn ON to display indoor humidity above the indoor
temperature on the HOME screen.
5. Proximity Sensor - When turned ON, the display will wake up automatically
upon approach.
6. Screen Saver - Options for this feature are:
NOTE: For weather or screen saver photo (upload) to work, the thermostat has
to be connected to the Internet, system registered, and the thermostat
is logged into your Lennox account. See menu > system settings >
account to verify. Screen saver will appear approximately 30 seconds
after no screen interaction.
• Off
• Weather - If turned on, will allow up to 26 animated weather screen
savers based on the AccuWeather outdoor weather forecast for the
local zip code.
• Power Save - Screen is blank until the screen is touched or activated
by proximity sensor if enabled.
• Photo
» Photo Upload
• Logged into either www.lennoxicomfort.com or your Lennox
iComfort mobile app and select your applicable thermostat if
more than one exists. Select the menu icon and then select
“upload photo”.
• A photo upload screen will appear that will let you browse for
a photo on your computer or mobile device. Navigate to the
desired photo and select it. Then select Upload.
NOTE: It may take a few minutes depending of the photo size to
upload to your thermostat. The following are approximate
upload times, depending on your Internet access speeds,
times may vary.
Table 4. Approximate Picture Upload Time
File Size Upload Duration
1.59MB 1:25 minutes
2.05MB 1:49 minutes
2.77MB 1.51 minutes
5.91MB 2.24 minutes
NOTE: Picture requirements:
• Select a photo with 640 x 400 up to 1280 x 800 pixel resolution.
• Photo format supported are PNG (recommended), JPG, JPEG,
GIF and BMP. On Apple IOS mobile devices the le format
HEIC is supported.
• Maximum le size is 20 MB. Larger photos may take longer to
upload to the display. Photo lename CANNOT have spaces or
special characters.
» Select Photo
• Return to the thermostat and go to menu > settings > display
> screen saver.
• Select photo and a screen will appear asking you to either
accept or reject the photo.
• Accept it to make the photo your screen saver image.
• Repeat the above procedures for any additional E30 or S30
thermostats available through your web portal or mobile app.
» Delete Photo
• Return to the thermostat and go to menu > settings > display
> screen saver.
• Select photo and a screen will appear asking you to either
accept or reject/delete the photo.
• Select reject/delete.
» Replace Photo
• Return to the thermostat and go to menu > settings > display
> screen saver.