User Guide

17
3. Factory Reset Peak Monitoring Settings - selecting this option will
reset Peak Monitoring settings to factory state.
Canceling Peak Monitoring Event
The option to cancel will appear along the right side of the home screen.
When in an active energy savings event and you attempt to update any of the
following settings, a pop-up window will appear conrming you wish to exit the
active energy savings event which could result in higher energy consumption
during the event period:
• Adjusting the temperature set point manually.
• Selecting a schedule.
• Changing the mode of operations.
• Manually canceling the event from the home screen indicator.
Cancel Enrollment
The option to cancel enrollment in Energy Savings can be found by going to
Menu > Settings > Peak Monitoring > Energy Savings Settings > cancel
enrollment
Advanced Settings
This section is for installers and technicians ONLY to customize system settings
and run various diagnostic tests.
View Dealer Control Center
Allows installers and technicians to perform custom congurations tailored for
the homeowners unique requirements.
Restart
Options are to restart Smart Hub, thermostat or both.
Pair Smart Hub to iComfort Dealer Mobile App
This allows an installer to pair their mobile device to start the initial
commissioning of the system, or a technician to use a mobile device to perform
custom congurations or troubleshooting.
General
This section provides information and setting changes for various displayed
items.
About
This page will provide detailed information concerning the HD Display
(thermostat info) and Smart Hub. Provided are: model number, serial number,
hardware, software and Wi-Fi revisions.
In addition, for thermostat and Smart Hub, a software update option is listed.
Select software update and set Automatic Updates to YES or NO (default is
NO). You can also select check for updates now.
Dealer Info
This page will display or allow information to be changed concerning the
dealer. Items included on this page are name, address1, address2, city, state,
zip code, country/region, phone, email and website. There is a dealer access
option at the bottom of the page. Press the > button to access the dealer
access page.
Dealer Access
1. Remote View: This option allows the dealer access to remotely view your
system. Options are ON and OFF. Default is OFF.
2. Remote Control: There are two options under this section, OFF and ON/
ALWAYS. Selecting the desired option will place a green check mark next
to the feature.
3. Alerts and Notications: Default is OFF. Turning on this feature will allow
automatic notications to be sent to your dealer concerning maintenance.
Screen Lock
There are three options for screen locking. Default is unlocked.
• Unlocked - Changes can be made to any settings.
• Partially Unlocked - Screen is locked but temperature settings can be
changed.
• Locked - No changes can be made.
To unlock partially locked or locked, press anywhere on the screen and hold
for ve seconds.
Date & Time
The following items can be set on this screen:
1. The clock can be changed to 24 hour (military). Default is OFF.
2. The following settings are only available if the system is not connected to
the Internet.
• Daylight Savings - ON or OFF. Default is ON.
• Time Zone: Options are Pacic, Mountain, Central and Eastern.
Default is Central. Select time zone and press SET.
• Set Time - Local time can be adjusted. Press SET to nish.
• Set Date - Current date can be set. Press SET to nish.
NOTE: If the system is connected to the Internet, only changing to the 24 hour
clock is available. To change either time zone or daylight Savings,
temporarily disable Wi-Fi to make adjustments to those settings.