Product Overview
Table Of Contents
- ICOMFORT® S30 THERMOSTAT
- BASIC INFOMATION
- INSTALLER SETTINGS
- USER SETTINGS
- ACCOUNT SCREEN
- ADVANCED SETTINGS (INSTALLER SETTINGS)
- AWAY SCREEN
- AWAY SETTINGS SCREEN
- COOL MENU SCREEN
- DISPLAY SCREEN
- EDIT SCHEDULES SCREEN
- FAN SCREEN
- FEELS LIKE SCREEN
- GENERAL SCREEN
- HEAT/COOL SCREEN
- HEAT MENU SCREEN
- HOME INFO SCREEN
- HOME SCREEN (Thermostat ON)
- HUMIDITY SCREEN (Humidity Control)
- IHARMONY ZONING SCREEN (if equipped)
- MENU SCREEN
- MODES/SCHEDULES SCREEN
- NAME SCREEN
- NOTIFICATIONS (REMINDERS) SCREEN
- PUREAIR™ S PERFORMANCE SCREEN
- SCHEDULE HOLD SCREEN
- SCHEDULES SCREEN
- SETTINGS SCREEN
- VENTILATION SCREEN (Fresh Air Damper/HRV/ERV)
- WEATHER FORECAST SCREEN
- WI-FI SCREEN
- ZONING SCREEN
- REVISIONS
iComfort
®
S30 Ultra Smart Thermostat / Page 5
ICOMFORT
®
S30 COMPONENTS (CONTINUED)
SMART HUB CONTROLLER
• Stores user’s system settings from the High Denition
Color Display or mobile Apps in non-volatile memory
• Built-in Wi-Fi connection to the Internet is accomplished
through the Smart Hub Controller and the home Wi-Fi
network (LAN)
Wi-Fi connection to the Internet is accomplished through
the Display directly or using mobile Apps.
Supports wireless bands 802.11b, 802.11g and 802.11n.
• One Smart Hub Controller can connect to and control
other Smart Hub Controllers in the home through the
home Wi-Fi network
Multiple Smart Hubs in a home can be assigned to a group
(up to nine groups with up to eight Smart Hubs in each
group). All Smart Hubs in a group can communicate with
other Smart Hubs in the same group over the home Wi-Fi
network.
• USB port allows eld rmware upgrades for the S30
thermostat components
• Firmware updates can also be pushed from the Lennox
server to the Smart Hub Controller
• Full RSBus communication between the Smart Hub
Controller and HVAC equipment:
• Indoor To Outdoor Unit:
• Four Wire, 18AWG (RSBus)
• Indoor Unit To Smart Hub Controller:
• Two Wire, 18AWG (RSBus) unshielded thermostat
cable for low voltage Smart Hub power terminals
(R, C, + and -)
• Two Wire, 18 to 22AWG (RSBus) shielded
thermostat cable recommended for Smart Hub
communications terminals (I+, I-, A and B)
• Screw terminals for wiring hookup
• Power (24VAC) to the Smart Hub Controller is supplied
by the indoor unit
• Mounting hardware for Smart Hub Controller is eld
furnished
• Dealer Commissioning / Manual Reboot Button is
located on the side of the case
Quickly press the button to begin the commissioning
process. Press and hold the button for 5 seconds to
reboot the Smart Hub..
• Two LEDs status icons on the front of the case show
current operating conditions:
• System Status Indicator LED
• Green - System is normal (No system errors)
• Red - HVAC Error (System has a critical alert which
requires attention)
• Cyan - HVAC Error (Indoor unit is not connected or
unable to communicate)
• Magenta - Thermostat Error (HD display not
connected)
• Amber - Wi-Fi (Wi-Fi is not connected, no Wi-Fi is
within range, or Wi-Fi hardware error)
If multiple errors are present at the same time the System
Status LED will display each condition for one second
on/one second off and then display the next color and
continue this sequence until all errors have been displayed.
Priority for errors are: Red (HVAC), Cyan (Alert), Magenta
(Thermostat) and Amber (Wi-Fi).
• Commissioning Status Indicator LED
• Blue - System is normal (No mobile device is directly
connected using Wi-Fi to the Smart Hub)
• Green (ashing) - Commissioning button has
been activated and Smart Hub is awaiting for a
connection with a mobile device
• Green (solid) - Mobile device is connected to the
Smart Hub
See Installation and Setup Guide for additional
information.