Product Overview
Table Of Contents
- ICOMFORT® S30 THERMOSTAT
- BASIC INFOMATION
- INSTALLER SETTINGS
- USER SETTINGS
- ACCOUNT SCREEN
- ADVANCED SETTINGS (INSTALLER SETTINGS)
- AWAY SCREEN
- AWAY SETTINGS SCREEN
- COOL MENU SCREEN
- DISPLAY SCREEN
- EDIT SCHEDULES SCREEN
- FAN SCREEN
- FEELS LIKE SCREEN
- GENERAL SCREEN
- HEAT/COOL SCREEN
- HEAT MENU SCREEN
- HOME INFO SCREEN
- HOME SCREEN (Thermostat ON)
- HUMIDITY SCREEN (Humidity Control)
- IHARMONY ZONING SCREEN (if equipped)
- MENU SCREEN
- MODES/SCHEDULES SCREEN
- NAME SCREEN
- NOTIFICATIONS (REMINDERS) SCREEN
- PUREAIR™ S PERFORMANCE SCREEN
- SCHEDULE HOLD SCREEN
- SCHEDULES SCREEN
- SETTINGS SCREEN
- VENTILATION SCREEN (Fresh Air Damper/HRV/ERV)
- WEATHER FORECAST SCREEN
- WI-FI SCREEN
- ZONING SCREEN
- REVISIONS
iComfort
®
S30 Ultra Smart Thermostat / Page 33
INSTALLER SETTINGS
EQUIPMENT (continued)
Thermostat
(About)
• Model Number
• Serial Number
• Software Revision
• Hardware Revision
• Language Support
• Equipment Type name
(Adjust Settings)
• Screen Locked (Prevents tampering with thermostat
settings)
• Unlocked (no security)
• Partially Locked (prevents tampering with the menu
settings, setpoints can be adjusted)
• Locked (prevents tampering with the thermostat)
• Display Outdoor Weather (on/off)
• Display Air Quality (on/off)
• Outdoor Temperature Source
• Off
• Internet
• Sensor
• Display Indoor Humidity (on/off)
• Screen Saver (on/off)
• Off
• Weather
• Power Save
Weather displays the current weather conditions screen.
Power Save displays a blank screen until the screen is
touched or the proximity sensor is activated.
Auto Brightness (on/off)
If Auto Brightness is turned off a slider appears to
manually adjust the brightness of the display.
• Brightness Value (0 to 100%, default is 80%)
• Proximity Control (on/off)
Proximity sensor turns on the display backlight at a
specic distance.
• Wide Setpoint (on/off)
• Reset Thermostat (factory default settings)
Reset Options
• Restart Smart Hub
• Re-Congure System
• Reset HVAC Equipment (resets all HVAC equipment)
• Factory Reset Thermostat
• Factory Reset Smart Hub (resets Smart Hub to factory
state)
NOTIFICATIONS SCREEN
Provides information for active and previous notications.
When selecting either a cleared or active notication a
brief description and alert code will be displayed.
Notications are categorized by Smart Hub, Air Handler or
Furnace, Air Conditioner or Heat Pump, Zoning Control (if
installed) and the iComfort
®
S30 Thermostat.
To expand a notication for more details of the alert code,
touch the down arrow to expand the description.
Touch the clear button to move the notication to the
cleared area.
TESTS SCREEN
A variety of system tests can be performed by the
installer.
Various tests are available depending on equipment in the
system. By default all items to be tested are enabled.
• Verify Airow Per Zone
• Blower Circulation Airow
• Heating Circulation Airow
• Cooling Circulation Airow
Touch the down arrow next to each airow type to adjust
the individual airow. Use the plus and minus buttons to
adjust airow in 5 cfm increments. Press and hold arrow
for rapid adjustment.
If no zoning is installed, zone airow settings will be
for zone 1 only. If zoning equipment is detected by the
system, zones 1 through 4 will be listed.
• Select Tests to Run
Selecting a specic test will uncheck the item. When a
specic set of tests are completed the results will be
displayed on the screen next to the tested item. Touch and
scroll to see all tested items. Touch Continue to advance
to the next test.
FEATURES