ComfortSense® 7500 Commercial Thermostat User Guide 507505-02 6/2018 Supersedes 5/2017
Table of Contents Features................................................................2 Home Screen Temperature Indicator..................2 Home Screen Information....................................3 Operating Mode Selection...................................5 Home Screen Temperature Indicator 2:31 am | thurs Ⓐ occupied Select Modes.................................................................. 5 Fan Operation.................................................................
F. The yellow line indicates the actual room temperature on the temperature dial indicator. C. Displays current time. D. Menu - This will allow access to notifications, performance report, schedules and settings. E. This allows you to set the heat-to (if enabled) temperature. Selecting the heat-to or temperature dial position indicator will take you to the temperature setting detail screen. The temperature dial will change from white to red when heating is active. F.
• From the override setting screen, the options are 1 hour, 2 hour or next scheduled period. Make selection and then touch set. • For the 1 or 2 hour setting the home screen will indicate schedule hold until time indicated (i.e., 11:57 pm). To exit schedule hold, touch X • When until next period is selected, the set point will be kept until the next program schedule period. To exit until next period, touch X. K.
setup for up to four days. Go to menu > user settings > edit schedules and select Holiday. To exit Holiday mode, touch the cancel button on the home screen. M. Indicates whether in occupied or unoccupied mode when running a regular schedule. This will be displayed when running schedule 1 or 2 and holiday. Under edit schedules, either occupied or unoccupied can be set under the day time event (occ1, unocc1, occ2 and unocc2). Table 1.
HEAT ONLY allows only heating demand. COOL ONLY allows only cooling demand. OFF indicates system has been turned off. EMERGENCY HEAT allows heat pump system to use a secondary heat source to come on and reach the desired user temperature setting faster. 6. SCHEDULES (1, 2 or holiday) See Edit Schedules on page 13 for customizing schedules). 7. ON, AUTO and CIRCULATE - Select by touching the desired fan operation ON, AUTO and CIRCULATE. When selected a green check mark will be indicated. 2. 3. 4. 5.
• Touch the contractor info option for assistance. User Menu Screen Touch the three lines in the upper right-hand corner of the screen to access the menu. Selectable options under menu are notifications, performance report, edit schedules and settings. critical reminders high temperature protection error code: 0004 menu notifications notifications < 05/22 12:23pm dealer info 13 performance report Figure 5.
Performance Report The edit schedules screen will allow section of up too three separate schedules. On the edit schedules screen, each schedule can be renamed and edited. See “Figure 8. Renaming and Editing Schedules” on page 9 for editing schedules. This will display the total number of hours each month that the system has been running. Example would be for mar (March) 23H or 23 hours. To return to the menu screen, touch the house icon in the upper left-hand corner of the screen.
select days edit schedules · schedule 1 · schedule 2 · schedule 3 Individual days · individual days · week/weekend · all 7 days schedule x (rename) · select days · select mode · · · · · · · Monday Tuesday Wednesday Thursday Friday Saturday Sunday Week / weekend · week · weekend all 7 days All days To navigate to the next screen in the selection process, always touch the right-arrow next to the desired option.
User Settings Menu Table 3. User Settings (General) Setting Selection Function Description fan See “Fan Operation” on page 6. normal Heats home to desired temperature setting. Options are on or off. comfort If system is two-stage heating or cooling, then 2nd stage is locked in until demand is satisfied. emergency heat Bypasses the first stage of heating (any stage[s] of heat pump heating) and goes directly to the heat stage used for maximum heating to more quickly warm a very cold house.
Table 3. User Settings (General) Setting Selection Function reminders - Items on this list are by default disabled. Media filter, humidity pad, routine system check up, UV lamp, metal insert for PureAir and customer reminders 1 and 2*. Options for each reminder are disabled (default), 3mon, 6mon, 12mon, 24mon or a custom duration by specific date can be set. Once set an “expires on xx/ xx/xx (date) will be displayed next to the function. *Custom reminders 1 or 2 may have been renamed by the installer.
Table 3. User Settings (General) Setting Selection general - provides information about the thermostat and settings for screen lock, date & time and language. display - Allows the user to control some information that is displayed on the home screen. Function occupancy Description Pre-Occupancy: Options are 0 through 3 hours with a default of 0 hour. This selection opens the dampers early, either 1, 2 or 3 hours. Post-Occupancy: Options are 0 through 3 hours with a default of 0 your.
