Install Instructions

35
COMPRESSOR PROTECT
Default is ON and it can be turned OFF, however
only for one compressor cycle and then it will
revert back to ON.
If the system is running in compressor protection,
the home screen displays “WAITING” only if there
is cooling or heating call for the compressor
(Y1/Y2).
If compressor protection is running and there is a
demand for electric heating, the system waits for
the compressor protection timer to expire.
HUMIDITY SETTING
See separate sections - Humidity (see page 37)
and Dehumidity (see page 39).
CUSTOM REMINDER
Two custom reminders may be rename on this
screen to the desired name (name is limited to 19
characters). After entering the new name, touch
the done key to return to the customer reminder
screen.
To set a reminder go to the User Settings screen
and select reminders. The reminder setting
screen will appear and a list all of the predefined
reminders plus the two custom reminders will
appear at the end of the list.
Scroll to CUSTOM REMINDER 1 or 2 (or renamed
titles). Touch the title to select the reminder. By
default all reminders are set to disabled. Touch
disable to choose from 3mon, 6mon, 12mon,
24mon or custom date.
When finished, touch < to return to previous
menu.
RESET SETTINGS
To reset the thermostat to factory defaults, scroll to
RESET SETTINGS and touch to select. Read the
message and to continue touch CONFIRM.
IMPORTANT
RESET SETTINGS erases all programming
and returns the thermostat to the factory condi
tions, including the installer settings. Use this
only as a last resort.