CARE AND OPERATION INSTRUCTIONS ELDV Direct-Vent Gas Fireplaces P/N 875030M Rev. E 01/2011 MODELS This manual is one of a set of two supporting this product. Refer to P/N 850036M for Installation Instructions. Ce manuel est disponible en francais, simplement en faire la demande. Numéro de la pièce 875030CF. MILLIVOLT: ELDV-35NM ELDV-40NM ELDV-45NM WHAT'S INSIDE Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety and Your Fireplace . . . . . . . . . . . .
Thank you for your purchase. We appreciate your business! Please carefully read and follow all instructions in this manual. Pay special attention to all warnings and safety information. Following these safety, care, and operation instructions will help ensure many years of dependable and enjoyable service from your fireplace. • FREE SAFETY GUARD OFFER • The Lennox® SAFETY GUARD protects against severe burns and injuries by preventing direct contact with the front glass surface of your fireplace.
[FRENCH] La sécurité et votre foyer Toutes les parties de votre foyer Lennox Hearth Products deviennent EXTRÊMEMENT CHAUDES ! Afin d'éviter de vous brûler gravement ou de vous blesser, installez une grille ou une barrière physique pour empêcher tout contact direct avec la vitre. Pour commander un PANNEAU DE PROTECTION Lennox® GRATUIT pour votre foyer, consultez les détails dans la partie gauche.
Important Safety Information L'information de sûreté importante 1. WARNING: Do not operate appliance with the glass front removed, cracked or broken. Replacement of the glass should be done by a licensed or qualified service person . 1. AVERTISSEMENT. Ne pas utiliser l’appareil si le panneau frontal en verre n’est pas en place, est craqué ou brisé. Confiez le remplacement du panneau à un technicien agréé 2. Do not use this appliance if any part has been under water.
HOMEOWNER’S INSTRUCTIONS - ATTACHING SAFETY-IN-OPERATION WARNINGS Attaching Safety-in-Operation Warnings Apposition des mises en garde relatives à la sécurité d’utilisation Colocación de advertencias de seguridad en operación Your fireplace has been furnished with safety instruction labels that are to be affixed to the operation and control point of the fireplace.
General Information The fireplace models covered in this manual are direct-vent sealed combustion gas fireplace heaters designed for residential application. These direct-vent appliances operate with the combustion chamber completely isolated from the indoor environment. All air for combustion is brought in from the outside and exhaust gases are vented through the same direct-vent, co-axial (intake/exhaust) vent system. The Millivolt appliances have a millivolt gas control valve with piezo ignition system.
BTU Input Millivolt and electronic models come standard with a manually-modulated gas valve; flame appearance and heat output can be controlled at the gas valve. The BTU Input for these appliances are shown in Table 1.
Operation and care of your appliance To replace the door, engage the tabs with the slots and push it into position. WARNING Young children should be carefully supervised when they are in the same room as the appliance. Toddlers, young children and others may be susceptible to accidental contact burns. A physical barrier is recommended if there are at risk individuals in the house.
P IL Pressure-Tap (Inlet) OT TH it PIL O T LO W TP O FF TPTH HI IN OUT Manifold Pressure Inlet Port Variable Flame Pressure Height Adjustment Port Gas Inlet OT TP TPTH it PIL O T LO W O FF IN TH ON • Unit should spark at pilot and light. Gas Outlet OUT • Operate Normally.
MAINTENANCE (See Maintenance Schedule, Page 26) Refer to the maintenance schedule for maintenance tasks, procedures, periodicity and by whom they should be performed. Always verify proper operation of the appliance after servicing. WARNING Turn off gas and electrical power to the fireplace and allow it to cool before cleaning or servicing the appliance. CAUTION: Wear gloves and safety glasses for protection while doing required maintenance. Verify proper operation after servicing.
Front Glass Enclosure Panel, Removal and Installation WARNING • Do not attempt to substitute the materials used on this door, or replace cracked or broken glass. • Handle this glass with extreme care! Glass is susceptible to damage – Do not scratch or handle roughly while reinstalling the glass door frame. • The glass door(s) of this appliance must only be replaced as a complete unit as provided by the manufacturer. Do not attempt to replace broken, cracked or chipped glass separately.
INSTALL VOLCANIC STONE, GLOWING EMBERS AND LOGS Glowing Embers Separate into Quarter Size (separate) Pieces NOTE: Turn off all electricity to the appliance before you install volcanic stone, embers and logs. For log placement instructions, refer to the detailed steps in Figures 8, 9 and 10. Loosen the set screw for the venturi air shutter. Manually actuate the air shutter through several cycles. Set the air shutter to 3/32" before placing the logs. 1.
ELDV3530 Log Placement 2 4 5 Log Number Description 1 2 3 4 5 Log, Center Log, Rear Log, Front Log, Left Log, Right Catalog Number for the entire log set: H4656 1 3 Baffle Baffle Pins 1 2 Align the holes at the bottom of log (4) over the pins on logs (1) and (2). 4 3 Burner 1 Align groove at the bottom of log (3) over the grate as shown. Align holes at the bottom of log (1) over the pins on the burner Step 1 Step 3 Align holes at the bottom of log (2) over the pins of the back baffle.
ELDV4035 Log Placement 2 4 Log Number Description 1 2 3 4 5 Log, Center Log, Rear Log, Front Log, Left Log, Right 5 Catalog Number for the entire log set: H4657 1 3 1 Baffle Pins Baffle Align the holes at the bottom of log (4) over the pins on logs (1) and (2) 2 4 3 Burner Align holes at the bottom of log (1) over the pins on the burner Grate Assembly Align groove at the bottom of log (3) over the grate as shown.
ELDV4540 Log Placement (Repeat Steps 1 thru 4 from ELDV4035 Log Placement and then add the following Steps) 4 7 Log Number 2 1 2 3 4 5 6 7 6 3 1 Description Log, Center Log, Rear Log, Front Log, Left Log, Right Log, Right/Rear Log, Left/Rear Catalog Number for the entire log set: H4658 5 Place log (6) between log (2) and log (5) as shown Place log (7) over log (4) as shown 7 2 4 6 5 Step 5 Step 6 Figure 10 15 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Burner Adjustments (QUALIFIED TECHNICIANS ONLY) Flame Appearance and sooting Proper flame appearance is a flame which is blue at the base and becomes yellowish-orange in the body of the flame. When the appliance is first lit, the entire flame may be blue and will gradually turn yellowish-orange during the first 15 minutes of operation. If after a short period the flame stays lowered blue, or if the flame is orange with evidence of sooting (black tip), the air shutter opening may need to be adjusted.
Burner Air Shutter Adjustment Procedure Burner Air Shutter Adjustment WARNINGS • Air shutter adjustment should only be performed by a qualified professional service technician. • Ensure front glass panel are in place and sealed during adjustment. Air Shutter Rod Venturi • Carbon will be produced if the air shutter is closed too much. Any damage due to carboning resulting from improperly setting the air shutter is not covered under the warranty.
Warranty Your gas appliance is covered by a limited twenty year warranty. You will find a copy of the warranty accompanying this manual. Please read the warranty to be familiar with its coverage. Retain this manual. File it with your other documents for future reference. Replacement parts A complete parts list is found at the end of this manual. Use only parts supplied from the manufacturer. With proper care and maintenance, your appliance will provide many years of enjoyment.
Accessory Components Product Reference Information Cat. No. Model Ship. Weight Ship. Volumn H3948 ELDV-35NM 159 lb. 26.1 cu. ft. H3949 ELDV-35PM 159 lb. 26.1 cu. ft. H3950 ELDV-35NE 159 lb. 26.1 cu. ft. H3951 ELDV-40NM 182 lb. 26.06 cu. ft. H3952 ELDV-40PM 182 lb. 26.06 cu. ft. H3953 ELDV-40NE 182 lb. 26.06 cu. ft. H3954 ELDV-45NM 202 lb. 33.03 cu. ft. H3955 ELDV-45PM 202 lb. 33.03 cu. ft. H3956 ELDV-40NE 202 lb. 33.03 cu. ft.
Accessory Components Continued Style View Doors Style View Doors come in 2 beautiful styles. They are easy to install and will not require hardware to attach them to the standard glass door frame. The door includes heavy duty magnet door latches and functional twin-pane doors. Square Pane Design Arch Pane Design ARCH PANE DESIGN KITS Cat. No.
Accessory Components CONTINUED Bag of Glowing Embers Bag of Volcanic Stone Forced Air Blower Kit Single Speed ELDV35 ELDV35 ELDV35 ELDV35 ELDV40 ELDV40 ELDV40 ELDV40 ELDV45 ELDV45 ELDV45 ELDV45 Catalog No. Model No. H3961 BLKR-ELDV35 H3962 BLKH-ELDV35 H3963 BLKC-ELDV35 H4708 BLKBR-ELDV35 H3964 BLKR-ELDV40 H3965 BLKH-ELDV40 H3966 BLKC-ELDV40 H4709 BLKBR-ELDV40 H3967 BLKR-ELDV45 H3968 BLKH-ELDV45 H3969 BLKC-ELDV45 H4710 BLKBR-ELDV45 LBLK-100 Forced Air Kit Brick Liner Kits Model No.
Lighting Instructions – Millivolt GAS VALVE FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. • Do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. • If your gas supplier cannot be reached, call the fire department. A. This appliance has a pilot which must be lighted with a piezo igniter.
INSTRUCTIONS D’ALLUMAGE – VANNE GAZ Millivolt POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT : SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Cet appareil est muni d’une veilleuse qui doit être allumée avec un allumeur piézo-électrique. Lorsque vous allumez la veilleuse, suivre exactement ces instructions. B.
Lighting Instructions — Electronic FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. When lighting the appliance, follow these instructions exactly. B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor. C.
INSTRUCTIONS D’ALLUMAGE — Electronic POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L’ALLUMAGE AVERTISSEMENT: SI VOUS NE SUIVEZ PAS CES INSTRUCTIONS À LA LETTRE, IL POURRAIT S’EN SUIVRE UN INCENDIE OU UNE EXPLOSION CAUSANT DES DOMMAGES MATÉRIELS, DES BLESSURES CORPORELLES OU MÊME DES PERTES DE VIE. A. Lorsque vous allumez l’appareil, suivez exactement ces instructions. B.
MAINTENANCE SCHEDULE Annually (Before the onset of the Burning Season) MAINTENANCE TASK ACCOMPLISHING PERSON PROCEDURE Inspecting/Cleaning Burner, Logs and Controls Qualified Service Technician Inspect valve and ensure it is properly operating. Check piping for leaks. Vacuum the control compartment, fireplace logs and burner area.
Troubleshooting the Millivolt control System Note: Before troubleshooting the gas control system, Ensure external gas shut off valve, located at gas supply inlet, (and wall switch, iff applicable), is in the “ON” position. Important: Valve system troubleshooting should only be accomplished by a qualified service technician. SYMPTOM 1. Spark igniter will not light pilot after repeated triggering of igniter button.
Troubleshooting the Electronic Ignition System Note: Before troubleshooting, be sure that the appliance main line gas shut-off valve, the gas control valve and the wall switch are in the “ON” position. Important: Valve system troubleshooting should only be accomplished by a qualified service technician. Symptom Possible causes Corrective action 1. Nothing happens when ON/OFF switch is turned on (pilot does not spark). A. Low voltage/or bad lead wires.
Replacement Parts List No. ELDV35 DESCRIPTION ELDV40 ELDV45 Part No. – H4653 Qty. – 1 Part No. – H4654 Qty. – 1 Part No. – H4655 Qty. – 1 Log Set H4656 1 H4657 1 H4658 1 Burner Assembly - Natural H7203 1 H7204 1 H7204 1 Burner Assembly - Propane H7203 1 H7246 1 H7246 1 4. Gasket - Venturi 43K85 1 43K85 1 43K85 1 5. Venturi H1428 1 H1428 1 H1428 1 6. Bottom Panel H4661 1 H4662 1 H4663 1 7. Access Plate, Blower H4664 1 H4664 1 H4664 1 8.
Replacement Parts 23 15 31 22 2 16 24 44 17 8 43 1 6 20 45 42 7 21 11 9 10 3 4 33 34 5 41 32 14 35 13 12 13 12 40 30 30 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TOTO SCALE. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT SCALE.
Notes 31
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2006 Lennox Hearth Products P/N 875030M REV.
