User manual TAB-740 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference. www.lenco.
5. TV Player application 6. Install Applications 7. Uninstall Applications 8. Music 9.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. WARNING: Never place heavy or sharp objects on the LCD panel or frame. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: The excessive sound pressure from earphones and headphones can cause hearing loss.
5. TV Player application 5.1. Program Scan Select the TVPlayer application then it will have a tip of “There are no channels stored, do you want to update the list of channels?” Press “Yes” button to enter the scan Menu. The scan menu have two ways to scan, one is Auto scan, one is Manual scan. 5.1.1 Auto scan In the Auto scan menu there is some Areas to choose, the frequencys are changed according to the areas. Then press “ok” button to enter the auto scan state.
5.1.2 Manual scan In the Manual scan menu there is Area 、 Frequency 、 Bandwidth to choose, select the right selection or type the right number, then Press “ok” button to enter the manual scan state. In the process of scanning it will present the scanning frequency and the percent of the scanning. after finishing, it will have a tip to present the number of TV and Radio have been received. 5.2. DVB Mainmenu In the program playing, touch the screen, then it will present the DVB mainmenu.
5.2.6 icon is the channel information button, press the button, it will press Channel Information ,it include Channel name, Frequency, Signal Strength, Signal Quality, Video PID, Audio PID . 5.2.7 5.2.8 icon is the audio track button icon is the setting button, press the button you can . 5.3. DVB setting menu It include Audio Track、Channel Search、Factory data reset、Set password、Update system time、 TTX Region、LCN item.
5.3.1 AudioTrack. 5.3.2 Channel Search. 5.3.3 Factory data reset, the default code is 1234,the master code is 0000. 5.3.4 Set Password, the password is 4 digit code. 5.3.5 Update system time, the setting is making time synchronization system. 5.3.6 TTX Region, set the TTX language as you wanted. 5.3.7 LCN set, when LCN I is on, it will be According to the sequence of LCN if the stream have no LCN information, it will be start from 900.
10
11
12
13
14
Service and support For information: For support: www.lenco.com http://lencosupport.zendesk.com Lenco helpdesk: Germany The Netherlands Belgium France 0900-1520530 0900-23553626 02-6200115 03-81484280 (Local charges) (Local charges + 1ct p/min) (Local charges) (Local charges) The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. When contacting Lenco, you will always be asked for the model and serial number of your product. The serial number can be found on the back of the device.
