Operation Manual

ManualsBrandsLenco ManualsAudioSCD-42

PORTABLE STEREO FM RADIO WITH

CD-PLAYER AND CASSETTE

SCD-42

INSTRUCTION MANUAL

For information and support, www.lenco.com

Summary of content (8 pages)

PAGE 1
PORTABLE STEREO FM RADIO WITH CD-PLAYER AND CASSETTE SCD-42 INSTRUCTION MANUAL For information and support, www.lenco.
PAGE 2
WARNING CLASS 1 LASER PRODUCT CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM CLASS 1 LASER PRODUCT APPAREIL Á LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 This product contains a low power laser device. Warning: Do not touch the lens. DO NOT THROW BATTERIES IN FIRE ! PRECAUTIONS Follow the advice below for safe and appropriate operations. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid.
PAGE 3
LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. VOLUME CONTROL FUNCTION SWITCH CARRYING HANDLE CASSETTE PAUSE CASSETTE STOP/EJECT CASSETTE F.FWD CD OPEN BUTTON CD DOOR CASSETTE REWIND CASSETTE PLAY FM STEREO INDICATOR DIAL SCALE MODE SWITCH CD DISPLAY TUNING CONTROL SPEAKER CD NEXT BUTTON PLAY/PAUSE BUTTON CD BACK BUTTON CASSETTE DOOR PROG/CLK-ADJ.
PAGE 4
TURN ON / OFF THE SYSTEM Press the POWER button to turn the audio on. To change the audio mode between CD, RADIO AND TAPE , set the FUNCTION switch while the power is on. The audio mode is displayed. Turn off the unit by pressing the POWER button. " OFF " word will be shown on the display and then resume the current time. POWER CLOCK ADJUSTMENT The clock is displayed �� on LCD display at standby mode. 1. Press and hold the PROG / CLOCK-ADJ./PLAY MODE button, 2.
PAGE 5
FOR BETTER RECEPTION FM NOTE : 1. FM stereo LED indicator lights if receive FM stereo broardcast and the MODE switch set on "FM STEREO". 2. When too much noise is heard during FM STEREO reception, set MODE switch to FM mono. AFTER LISTENING Turn off the unit by pressing the POWER button. COMPACT DISC PLAYBACK 1. Turn on the unit by pressing the POWER button. 2. Set to CD 4. 5. POWER FUNCTION CD 6. 3. Insert a disc with the label side facing up. Close the disc holder.
PAGE 6
REPEAT , REPEAT ALL AND MIX PLAYBACK Press PLAY MODE button during CD playback. CD plays with a single track repeat, all tracks repeat or randomly. PLAY MODE FOR NORMAL COMPACT DISC PLAYBACK Mode sequence REPEAT >> REPEAT ALL >> MIX >> CLEAR.
PAGE 7
TAPE PLAYBACK 1. Set to TAPE FUNCTION TAPE 2. Insert the cassette. 3. Press the PLAY button. PLAY TO STOP PLAYBACK Press the STOP / EJECT button. TO INTERRUPT PLAYBACK Press the PAUSE button. To resume play, press the PAUSE button again. TO FAST WIND Press the REWIND or F.FWD button. Press the STOP/EJECT button to stop winding at the desired position. MAINTENANCE CLEANING CD If the CD skips or will not play , the disc may need cleaning.
PAGE 8
SPECIFICATIONS CASSETTE SECTION Track format: Tape speed: F.F. & REW time: Frequency response: 2 track stereo 4.75 cm / sec. 170 sec. (F-60 tapes) 125 Hz - 8000 Hz (Normal tape) CD SECTION Channels: S / N ratio: Wow & Flutter: Sampling frequency: Quantization: Pick up light source: Pick up wave length 2 channels 60 dB undetectable 44.1 kHz 8 x over sampling 1 bit DA converter Semi - conductor laser 790 mm RADIO SECTION Tuning ranges: Antennas: FM 87.