SCD-38 USB PORTABLE FM RADIO WITH CD/MP3-PLAYER AND USB CONNECTION User manual English Lenco recommends attentive reading of the manual before operating the unit. For information and support, www.lenco.eu V1.
Table of content Box content ......................................................................................................2 Important notes ................................................................................................3 Maintenance ....................................................................................................4 1. Exploring the unit & basic controls............................................................5 2. 3. 4. 5. 6. 7. 1.1.
Important notes Safety • As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. • The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. • Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it further.
with liquids, such as vases, shall not be placed on apparatus. • WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. • WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. • The USB memory stick should be plug in the unit directly. USB extension cable should not be used to avoid failing of data transferring and interference caused.
1. Exploring the unit & basic controls 1.1. Parts on the front view side of the player LIFT TO OPEN PLAY/ STOP PAUSE FM S T. POWER NEXT PREV FOLDER 12 1. 14 8 3 1 PROG 5 6 7 4 10 2 9 14 11 13 Folder: During MP3/WMA playback, press FOLDER button to flash the current folder SN. . When flashing folder SN. , press FOLDER button to select next folder and play the first track in the folder. 2. NEXT: skip next track; Press and hold the button to fast forward play during play mode 3.
15 15. USB socket: To connect a USB devise 1.2. Parts on the left view side of the player 16. Function switch 17.
1.3. Parts on the rear view side of the player 18. AUX IN socket (Input audio signal) 19. AC IN socket 1.4. Parts on the right view side of the player 20. Tuning control 21. FM MONO/STEREO Switch 22.
2. Connecting to a power source You can use the AC power or batteries as a power source. Note: Batteries are not included 2.1. Connecting the AC power cord Insert one end of the supplied AC power cord into the AC IN socket located at the rear view of the player, and the other end to the wall outlet. Note: If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plug is polarized and only fits one way into the wall outlet and rear of the set. 2.2.
3.2. Repeat play • • • Press REPEAT button once, it will flash REP point, and play the current track over and over. Press REPEAT button twice, it will flash folder SN. And display track SN. Alternatively, and play the tracks in the current folder over and over. Press REPEAT button thrice, it will display REP point, and repeat playing all tracks in order. 3.3. Programmed play You can make a program of up to 20 tracks in the order you want them to be played.
3.5. Playing other audio source through your set You can enjoy the music of any external audio source through the set (Via 3,5mm st. jack). Note: 3,5mm stereo jack cable is not included. 1. Insert the audio cable with one end into the HEADPHONES jack or LINE OUT jack of your external audio source, and the other end into the AUX IN jack of the set. 2. Slide the FUNCTION switch to CD/USB/AUX IN position. 3. Slide the FUNCTION switch to OFF position after use.
5. Trouble shooting Please refer the following instruction when there are some problems with the unit. If the problem still exits, please consult your dealer. Problem Remedy Check the AC power cord. General The unit does not turn on Check the batteries (inserted correctly and new) Check the FUNCTION switch.
6. Specification Power source AC 230V DC 9V (6 size ”C” batteries) Power consumption < 1 W (in standby mode: function switch is in OFF position) 9 W(during operation: function switch is in non OFF position) ≤ Speakers 4 ohms Output power 1.
