User manual

Running”, a level bar with number appear to choose;

• Input your average stride length, for example 80 (cm) by using the /

and Center ( ) buttons. (Refer to “Stride Length Measurement”

mentioned as below.)

• Once average stride length is set, it will return to pedometer menu.

(Adjustment range can be set from 10 ~ 200 (cm) by increase / decrease 1

cm step)

• Choose “Exit” to return to main menu.

Stride length measurement

• Walk / Jog / Run 10 steps with your normal stride as illustrated below.

• Measure the distance from START to END in centimeter (cm). Then

calculate your stride length by dividing the total distance by 10. Example:

• Total distance = 800 cm

• 800 cm ÷ 10 steps = 80 cm

b. Start / Exit pedometer counts

• Choose “Start” to enter and start pedometer counts function when

settings are completed, the pedometer counts display is appearing and

time is start running, from “00:00:00”. At same time pedometer sensor is

starting to counts your move. Now you can start walking, jogging or

running as preferred in setting.

• Those wanted information; such as: Steps, distance, calorie burned and

Speed, are showing on pedometer counts display screen for view.

Pedometer Counts Display

• The pedometer data will only be shown on the screen after the first +/-

12 steps because the software needs some data to analyze the steps and

then show the results on the screen.