USER’S MANUAL PODO-151 Media Player with Pedometer For information and support: www.lenco.
Warnings Don’ts • Do not place naked flames, such as lighted candles on or near the product. • Do not place objects filled with liquids, such as vases on or near the product. • Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration. • Do not use this product with wet hands. • Do not clean this product with water or other liquids. • Do not block or cover the slots and holes in the product.
1. Get to know the controls on Player Item Description 1 ( ) Button (Previous / Fast-Rewind / VOL-) 2 ( ) Button (Next / Fast-Forward / VOL+) 3 M Button (Menu / Enter / Select) 4 Center ( 5 V (VOL) Button (Volume Control) 6 Main Power Switch (ON - OFF) 7 Microphone (Mono) 8 Earphone Output Jack 9 USB Mini Connector 10 Micro SD Memory Card Slot 11 TFT LCD Display ) Button (Play / Pause / Standby ON - OFF) About Player Battery Player has an internal, non–user-replaceable battery.
Battery is in full Note: Player continues to use battery power after it’s been turned off, if unit isn’t used for a while, the battery might need to be charged. a. b. Charging the Battery: You can charge the player battery in two ways: Connect player to your computer. Or, Use the USB power charger.
a. To Connecting Player To connect player to your computer, plug the connector of USB Cable into a USB port on your computer, and connect the other end to player, then the “Connect” screen appear for view. Now the player is ready for media files transfer with your computer and the battery is charging. You can transfer the media files by using the computer mouse use drag and place, or copy and paste, in between the player and your computer. Disconnect it when you’re done. b.
“Main Menu” screens (If Music chooses) (If Movie chooses) (If Record chooses) (If Voice chooses) (If Photo chooses) (If Setup chooses) (If eBook chooses) (If Game chooses) (If Pedometer chooses) 4. Use Setup Menu You might need to set date & time or change some default setting as you desired in setup sub menu before you start to use the player. To go into setup menu, from main menu, choose “Setup” by use / ( / ) button and then press M button, a “Setting” menu appears to use.
Setup Menu (Menu Page 1) (Menu Page 2) a. To Setup “System time” (Date & Time): Choose “System time” by using / ( & time setting screen appears to use. Press V (VOL) button, the year is highlighted then adjusting to current year by pressing the / ( / ) button. And repeating the adjusting methods by V (VOL) and / / ) button again for finished those items; Month, Date, Hour, Minute and seconds ( setting adjustment.
) buttons. To set sleep time, choose “Power off”, then choose “Sleep time”, a levels bar with number menu appear, choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 / 120 minutes” as you want by using M and / ( / ) buttons. e. To Change “Online mode” (Applicable depend on Model) You might need to change the online mode when connecting with computer system. In the sense that some operating systems (under Windows 2K SP4) cannot support two driver letters in one USB disk.
happens. Please follow the instruction posted by the dealer (if any) or follow the instruction from System Utility Tools if provided. It is not recommended to do if the player is proper working. j. To “Exit” Select Exit to back to main menu. Or, press and hold the M button to go back main menu. 5. Use Music Menu You can use music player to playback with supported music file format of audio coding; WMA and MP3 are supported by the player.
e. Use Lyric Display This player supports “*.LRC” lyric files and lyrics can synchronous displayed while playing music if you music has lyric included. How to know whether the lyrics exist? If the current song has matching lyric files, the color dot beside the Lyric Message icon will be turned to green color from red in Music Now Playing screen.
choose “Normal / Repeat one / Folder / Repeat folder / Repeat all / Random / Intro” as you desired by using b. / ( / ) and M buttons. To Change Equalizer In music playing mode, press M button, a Music Submenu appear, the choose “Equalizer”, then choose “Natural / Rock / Pop / Classic / Soft / Jazz / DBB” as you desired. c.
In Movie Now Playing” screen, press Center ( ) key to start the play. Press Center ( ) button to pause and to back to Movie Now Playing screen. Press it again, the video will play continue. b. To Play Previous or Next Video Press ( ) button to play next movie file. Press ( ) button to play previous movie file. c. Use Fast-Forward or Fast-Backward Press and hold ( ) button to play fast-forward. Press and hold ( ) button to play fast-backward. d.
c. Delete All In movie submenu screen, choose “Delete all” then selects “Yes / No” by using / ) button. One “YES” or “NO” appear then press M button to confirm. All movie files will be deleted once YES is selected and confirmed, a “Deleting” screen appear for a while and deleting process is in progress, then “Empty disk!” message will shown on / ( screen for few seconds. d.
Run “AMV Convert Tools”, click to choose the folder where to save the AMV files, and then click to select the folder where the original files are. The original file will show in the file window once selected. Select with highlight the unprocessed AMV files in the file window, the highlighted into . And then click icon will be icon and a dialog box will be shown. Choosing pixels of AMV to “160x128” and Frames per second to “middle”, then click OK to confirm.
Note: Only pixels in 160x128 can be supported. 11. Use Record Menu You can use the player as a Voice Recorder and recording voice memos using the built-in microphone. 1. To Start Recording Voice Memo From main menu, choose “Record” by using Recording” screen appear to use. / ( / ) and M buttons, a “Now “Now Recording” Screen 2. To Start / Pause Recording Press Center ( ) button to start the recording and the recording time is running.
256K BPS” values as you desired by using / ( ) and M buttons. / 13. Use Voice Menu For playback and manage the recorded voice memos file. From main menu, choose “Voice” menu by using “Voice Now Playing” screen appear to use. / ( / ) and M buttons, a “Voice Now Playing” Screen a. To Play and Pause Recorded Voice Memos In Voice Now Playing screen, press Center ( Press Center ( b. To Play Previous or Next File Press ( ) button to play next file.
b. / or choose a voice file by using / ( / ) and M button. It will go back to music now playing screen once a music file is selected. Then press Center ( ) button to play. Delete File In voice submenu screen, choose “Delete file” a list menu appear, and then choose which voice file that you want to delete by using / ( / ) and M buttons. Once file is selected, press M button and choose Yes to confirm or No to cancel. c.
To cancel the repeat A – B function, press the M button. Or press Center ( pause. ) button to Set Replay Times: In voice playing mode, press M button, a Music Sub-menu appear, the choose “Replay times”, then choose “1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10” as you desired by using / ( / ) and M buttons. The Player will replay those music file as your selected number of times accordingly.
to use / ( / ) button to browse next / previous photo in photo playing mode when Manual Play is selected. Choose “Auto play”, a setting menu appear, then choose “2 / 3 / 4 / 5 / 5 / 6 / 7 / 8 / 9 / 10 second(s)” as you desired by using / ( / ) and M buttons. The slide show function is activated as your selected time gap to playing the photo files one by one automatically. c.
by using / ( / ) button. Once file is selected, press M button then Center ( b. Playback Set In eBook Submenu, choose “Playback set” and then choose “Manual play”. You need to use / ( / ) button to change next / previous page for reading when Manual Play is ) button to read. selected. Or, Choose “Auto play”, a setting menu appears, then choose “1 / 2 / 3 / 4 / 5 / 5 / 6 / 7 / 8 / 9 / 10 second(s)” as you desired by using / ( / ) and M buttons.
c. Bookmark Add In eBook playing mode, select the reading page you want to bookmark, press M button to call up eBook submenu. Choose “Bookmark Add” by using / ( / ) button and then press M button, the pages is saved into bookmark and go back to current reading page automatically. d. Exit Select Exit for back to eBook list menu screen. 21. Use Memory Card Slot This player allows you to play those support media files from your memory card (T-Flash).
a. Setup your pedometer before start Before you start to use the pedometer function, you need to input your personal information and calibrates the player’s pedometer sensor to personalize it. From pedometer menu, choose “Pedometer”, then choose “Setting” by using ) and M buttons. A sub list menu appears to use. Choose “Women / Man”, then choose stride “Walking / Jogging / Running”, a level bar with number appear to choose.
Those wanted information; such as: Steps, distance, calorie burned and Speed, are showing on pedometer counts display screen for view. Pedometer Counts Display To Exit pedometer counts function and Save the personal counts record, press M button, a confirm screen appear, then choose “Yes” to confirm and the screen will return to main menu. The record saved. Or, choose “No” to cancel and continue the pedometer counts. In pedometer menu, choose “Look up” to view the personal counts record.
Press ( ) button to play previous music. Press and hold ( ) button to use fast-forward Press and hold ( ) button to use fast-backward. Press V (VOL) button, a change volume control screen appears, then press ( / ( ) buttons to adjust volume levels to down / up. Wait for 6 – 8 seconds or press Center ) button to return to pedometer counts display screen. Note: In pedometer mode, some music settings are defaulted and cannot be changed. Such as Repeat All (Cycling), In Order Play. f.
unit with lanyard / string around a child’s neck. g. The unit may not count steps correctly in the following conditions: The unit is not positioned correctly. When the front of the main unit is placed in the angle of less than 60° or horizontal to the ground. NOTE: The unit can count steps even if it is slanted or placed upside-down, or if the main unit is perpendicular to the ground. The unit moves loosely.
Unit cannot turn ON * Check whether Power is slide to ON. * Check battery is it charged with enough energy. No sound is heard from headphone. * Check whether Volume is set “0” and connect the headphone plugs firmly. * Check whether the headphone plug is dirty. * Corrupted MP3 may make a static noise and the sound may cut off. Make sure that the music files are not corrupted. Characters in LCD are corrupted * Check whether the right language has been selected. Download of music files fails.
26. Disclaimer Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual 27.
