DVD-320
Content Introduction Safety Precautions 2 Important Safety Instructions 3 Caution 5 Features 6 Front Panel and Rear Panel Illustration 7 Remote Control 8 Connections Connecting to a TV set 9 Connecting to an AV Receiver with Digital Audio Input 11 Advanced Features Mode and Features Setup 12 Remote Control Operation 20 MP3 Playback 25 Others Troubleshooting 26 Remote Control Preparation 27 Specifications 29 1
AVIS RISQUE CHOC ELECTRIQUE NE PAS OUVRIR 2
3
4
5
Features Introduction Full compatibility with MPEG4, DVD, CD, MP3, KODAK Picture CD, CD-R and CD-RW ( f i n a l i z e d ) 5.
9 10 1 2 1 POWER 3 5 PREV BUTTON 2 DVD TRAY 6 STOP BUTTON 3 LED SCREEN 7 NEXT BUTTON 4 REMOTE SENSOR 8 USB 4 5 6 7 9 PLAY/PAUSE BUTTON 10 OPEN/CLOSE BUTTON 100-240V ~ 50/60Hz 1 2 3 4 5 1 2.
Introduction Remote Control LED screen dts VCD PBC 10 DVD DISC 2 VCD PLAY PAUSE DISC PLAY PLAY TIME REPEAT MP3 DISC PBC 10 DOLBY DIGITAL Remote Control 1.STANDBY 2.SUBTITLE OPEN/ STANDBY CLOSE SUBTITLE LANGUAGE TITLE ANGLE VOL+ 17.TITLE 18.VOLUME INCREASE 19.VOLUME DECREASE 3.LANGUAGE MENU 20.MENU 4.OPEN/CLOSE 5.ANGLE 6.PROGRAM VOL- PROG PLAY/ PAUSE SETUP 7.SETUP 24.RIGHT 9.L/R L/R 10.NUMBERICA KEY PAD 1 STOP 2 25.DOWN 26.STOP 3 GOTO 4 5 6 10+ 7 8 9 0 14.
Connections CONNECTING THE DVD PLAYER TO THE TV USING AN AV CABLE Connect the DVD player s FR and FL Phono to the audio input Phono on the TV TV VIDEO IN AUDIO IN L R Audio cable Video cable 100-240V ~ 50/60Hz CONNECTING THE DVD PLAYER TO THE TV USING AN S-VIDEO CABLE Use an S-VIDEO cable ( not supplied) to connect the player to your TV. Use a standard stereo Phono lead (not supplied) to connect the audio.
Connections CONNECTING THE DVD PLAYER TO THE TV USING A SCART CABLE Use the SCART cable (not supplied) to connect the DVD player and your TV. Set the [Video Type] to [TV-RGB]. TV VIDEO IN AUDIO IN L R Scart 100-240V ~ 50/60Hz CONNECTING THE DVD PLAYER TO THE TV USING A Y/Pb/Pr CABLE Use the COMPONENT Cable(not supplied) to connect the DVD player to your TV. Set the [Video Type] to [YUV]. For Progressive Scan, set to [Y,Pb,Pr]. The [YUV] and [Y,Pb,Pr] signal is transfered through the same leads.
Connecting to an AV Amplifier with Digital Audio Input Connections Use a standard Digital audio coaxial cable (not supplied) 100-240V ~ 50/60Hz Coaxial cable Coaxial Digital Amplifier VOLUME INPUT SELECTOR POWER BYPASS PRO LOGIC 3 STEREO MODE TEST CHANNEL KARAOKE MUTE UP DOWN BASS 1 MIC 2 1 MIC VOL 2 MIC TREBLE ECHO EXCITE Notes: 1. Select the Coaxial digital audio output. 2. Set the player's Audio out to Raw or PCM mode . 3.
Advanced Features 1. General Steps of the setup menu A) Press the STOP button when playing a disc, then you press the setup button, the main setup menu appears. Note: Make sure the player is in stop mode. B) Press the Down and Right arrow buttons to highlight the icon of the desired page, then press the Down or Right arrow button to activate that page.
Advanced Features 2. Setup Items Introduction 2.1 LANGUAGE SETUP The language setup options are illustrated below: 2.1.1 OSD LANGUAGE Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose the OSD language you prefer. Press Enter to confirm, and it will display the OSD in that language. English French Spanish German Dutch 2.1.2 MENU Highlight the MENU option, and press the Arrow buttons to choose the menu language you prefer. Press the Enter button to confirm.
Advanced Features 2.1.3 AUDIO Highlight the AUDIO option, and press the Arrow buttons to choose the audio language you prefer. Press the Enter button to confirm. If the disc you are playing has that language available, it will playback the audio in that language. English French Spanish German Dutch 2.1.4 SUBTITLE Highlight the SUBTITLE option, and press the Arrow buttons to choose the subtitle language you prefer. Press the Enter button to confirm.
Advanced Features 2.2 SCREEN SETUP The system setup options are illustrated below: 2.2.1 TV TYPE According to the TV type, you can choose 4:3PS,4:3LB or 16:9 . 2.2.2 SCREEN SAVER If the SCREEN SAVER is on. The player will display the DVD logo for a long time. The DVD player will show a lively image on TV . If the SCREEN SAVER is off. The DVD player will display the DVD logo all the time when there is no disc or when playback has been finished. 2.2.
Advanced Features 2.2.4 VIDEO OUTPUT According to the output jack of the TV set, you can choose CVBS+S-VIDEO, CVBS+YUV , CVBS+RGB or YUV P-SCAN. CVBS+S-VIDEO CVBS+YUV CVBS+RGB YUV P-SCAN Note:. After selecting YUV P-Scan via setup-menu a confirmation window will popup. Please, confirm it with 'Yes' if your TV supports YUV P-Scan and if the player is connected to the TV via the YUV cable (3x RCA RGB). Otherwise select 'No'.
Advanced Features 2.3 AUDIO S ETUP The audio setup options are illustrated below: Downmix 2.3.1 DIGITAL OUT Highlight the DIGITAL OUT option, and press the Arrow buttons to choose the audio output mode you prefer. Press the Enter button to confirm. There are 3 optional audio output modes: SPDIF / RAW, and SPDIF/ PCM,OFF. A C B Downmix Note: When digital output is NOT in use, It is recommended to select OFF , to minimize circuit interference. 2.3.
Advanced Features 2.4 CUSTOM SETUP The custom setup options are illustrated below: Style Angle Mark 2.4.1 PARENTAL CTRL Parental Ctrl:1,2:G,3:G,4:PG13,5,6:R,7:NC17,8 level eight is. The first level discs are available to people of all ages and only suitable for adults. If you want to change the parental ctrl setting, enter the user s age control item and then enter the four digit password. The default password is 6666(if you are using this player for the first time, just enter this code).
Advanced Features Style Angle Mark 2.4.3 STYLE According to Style, you can choose Style 1, Style 2,Style 3 or Style 4 . Style Angle Mark Style 1 Style 2 Style 3 Style 4 2.4.4 ANGLE MARK On and off are the two choices for this item. When the content of a disc is multiangle shot, and angle mark is on, you may press the ANGLE button on the remote control to enjoy the scene in different angles. Parental Ctrl Style 2.4.
Advanced Features DISPLAY During playback, press DISPLAY to show the current time counter position. GOTO During playback, press GOTO to show the current time counter position. Enter the title number to choose the title Total Chapters Chapter Enter the chapter number to choose the Chapter. Enter the title number to choose the title _:__:__ Enter the play time number to choose the Play time.
Advanced Features STANDBY OPEN/ CLOSE Press the STANDBY button to switch between normal mode and standby mode. To open the disc tray, press the OPEN/CLOSE button. To close the disc tray, press the OPEN/CLOSE button again. 0-10+ keys These keys are used to manualy enter the time, as well as the title, chapter and track numbers. When a numeric item is displayed on the screen, press the 0-10+ keys to select the desired entry, press SELECT to confirm.
Advanced Features PREV Press the PREV button to skip to the previous chapter or track. NEXT Press the NEXT button to skip to the next chapter or track. STOP Press the STOP button once during playback to stop and hold playback. Press the PLAY button to resume playback from the point you pressed STOP. Press the STOP button twice to stop playback completely. PLAY/ PAUSE Play/Pause In pause state or stop state, press the button, the player will be in playing state.
Advanced Features VOL- VOL+ Press the < VOL+> button to increase the Volume. Press the < VOL-> button to reduce the Volume. MUTE Press the MUTE button to mute the Audio output. Press the MUTE button again to resume normal Audio output. ZOOM During DVD playback, press ZOOM to magnify the image as follows: ZOOMx1(NORMAL) ANGLE ZOOMx2 ZOOMx4 During DVD playback Press the ANGLE button to view scenes from different camera angles.
Advanced Features PROG White [PROGRAM] is on, press ENTER to display the [Program] submenu: Enter the track numbers in the order you would like them to be played. When you are finished, select [Play Program] and then press ENTER to play the tracks in the new programmed order. Select [Clear All] and press ENTER to clear all the numbers you have programmed.. 6 7 6 7 L/R Enter the title number and the chapter number in the desired order.
Mp3 PLAYBACK Advanced Features When an MPEG and an Mp3 disc is loaded, the scre en will be as follows: Queen Current directory name 1/17 ROOT CLOUD 01. Was Bor 1 02. Let me li 2 03. You are my 3 04. Under pre 001-1 4 5 ROOT ROOT Show files contents 00:17:00 44.1KHz 128Kbps The playing file is a Mp3 audio file. The playing file is a JPEG picture file. 04:49 Press to select the file when the cursor appears in the file window. Press select to play the current file selected by the cursor.
Make sure the Main unit s POWER button is on Ensure the batteries of the remote are working.
Remote Control Preparation Read this owner s manual thoroughly before Loading batteries into the remote control Other Press the OPEN/CLOSE button on the remote control (or front panel) to eject the disc tray. Load a disc, label side up, into the disc tray and press the OPEN/CLOSE button. The unit will take a few seconds to load the disc s initial data, display the disc type logo on the left upper corner on screen, and then it will start playback the disc automatically.
Remote Control Preparation Other The following message will be displayed on the screen when there is a problem with the loaded disc: Production qualities of DVD disc s vary, some disc s might deviate from the industrial standard. Some correctly formatted discs may playback on the player. However, the playback and operational quality of those discs may be substandard.
Specifications Power requirements: AC 100-240 Volt, 50/60Hz Power consumption: 15W Video standard: NTSC/PAL/AUTO Unit Weight: 1.7kg Video out Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1 S-video output connector(separate Y C signal output connector): Y output: 1.0V(p-p)/75 , sync, negative polarity C output: 0.286V(p-p)/75 Audio out 2.0 channel out: RCA pin jackx6 Coaxial out: 0.
