MDV-6 Home Cinema Set
FOREWORD THANKS Thank you for purchasing this product. Your choice of the product sufficiently displays your expertise in acoustic equipment. We are honored to provide you with more satisfactory products. It is suggested that you spare some time to read this user manual before connecting and operating your system. So you can get enhanced enjoyment and pleasure while using this product. IMPORTANT NOTICE Please unpack carefully, and keep all the accessories in the same place.
CONTENT FOREWORD……………………………………………………………………………………..1 CONTENT………………………………………………………………………………………...2 FRONT PANEL...………………………………………………………………………………..3 BACK PANEL……………………………………………………………………………………4 REMOTE CONTROL……………………………………………………………………………5 CONNTECTION WITH TV……………………………………………………………………...6 CONNECTION WITH AMPLIFIER………………………………………………………….….7 SYSTEM CONNECTION…………………………………………………………………….….8 BASIC OPERATION……………………………………………………………………..…..9-16 DVD MENU SETUP…..…………………………………………………………………….
FRONT PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
BACK PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
REMOTE CONTROL NOTE: 1. Place the batteries in the remote control and turn on the player, put the emitter against the sensor of player for remote control. 2. The distance of remote control should not exceed 7 meters, or else, it will be invalid. 3. If the sensor or remote control emitter is stuck with foreign matters, it may result in the malfunction in signal reception or not at all. 4.
CONNECTION WITH TV 1. If your TV-set has AV terminal, connect this unit to TV-set with A/V cables, and set TV-set to be AV status after confirming the connection is correct. (Figure 1) 2. If your TV-set has S-Video terminal, please use the S-Video connection cable to connect the player and TV-set, to obtain a higher quality image. (Figure 2) 3. If your TV-set has chromatics output terminal, please use three connection cables to connect the player and TV-set, to obtain a more vivid image. (Figure 3) 4.
CONNECTION WITH AMPLIFIER Setup of Digital Audio Output Connect the optical or coaxial output jack to the amplifier. While in of play or stop mode, press the setup button on the remote control to open the system setup page, switch to audio setup page by pressing the directional buttons, then move the cursor to Audio Out, select SPDIF/RAW or SPDIF/PCM, press Play/Enter button to finish. Press Setup button again to exit the setup.
SYSTEM CONNECTION Please refer to the following figure to connect your acoustic equipment. To keep all the connection correctly and firmly. Power supply can be connected finally.
BASIC OPERATION PREPARATIVE 1). Before turning on, check whether all the connection are correct and reliable. Plug the power plug into the corresponding power socket. 2). Press Power button on the front panel to turn on. 3). Press Eject button on the remote control (or on the front panel) to carry the disc tray outside, and put the disc into the tray, press Eject button again, this unit starts to read and play.
BASIC OPERATION TIME SELECTION In play mode, press T/F button on the remote control, the TV screen displays, VCD/CD Display: Disc Go To: --/-Track Go To: --/-Select Track: --/xx DVD Display: Title: --/xx Title: --/xx Chapter: --/xx Time: -/--/-- Chapter: --/xx Time:-/--/-- You can press ◄ ► directional buttons to move the cursor to the time position, then input the corresponding numbers by pressing the numeric buttons, then press Play/Enter button to enter the desired part for playing.
BASIC OPERATION LOUDNESS Press Loud button to set loudness on or off. While set loudness on, it can strength low sound signal. SOUND FIELD In play status, press DSP button, you can select different sound field effect. RESET In No Disc status, press Reset button can return the original setup or default value. STOP In play mode, press the Stop button, the TV screen will return to the startup screen, press Play/Enter button, the player will begin to play where it left off.
BASIC OPERATION PLAY/ENTER Press this button to enable the selected items. CLEAR Press Clear button to cancel the digital you have inputted. For example: the setting of programmed songs. STANDBY Press the Standby button on the remote control can switch to the standby mode. Before you perform the operation, make sure the main power is on. Note: This standby function is one kind of saving electricity modes. When the device does not be used for a long time, please close the main power.
BASIC OPERATION DITITAL BUTTONS 1). While playing songs, press the Digital buttons to directly select the songs you need. 2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and then pressing a Digital button (1--10). For example: If the 16th song is needed, you can press the 10+ button followed by the 6 button.
BASIC OPERATION 2). Press the directive keys ▲▼ to move the cursor to a certain directory, and press Play/Enter button to enter the directory. Press the direction buttons to enter the subdirectory or the file area, select a song with the cursor, press Play/Enter button to play the song. l During playing, press or button to select other songs under the current directory.
BASIC OPERATION DVD TITLE MENU SELECTION FUNCTION DVD disc features high capacity, records more than one movie, background data and songs. It is hereby given a name of TITLE, while more sections will be given under each TITLE, which are called Chapters. There are some songs in one chapter. While playing DVD discs, press the Title button, the TITLE menu will appear on the TV screen. (Available for DVD discs that contain more than one title menu).
BASIC OPERATION FM RADIO OPERATION 1. Enter FM Function In the turn-on or playing status, press the FM button on the remote control to enter FM status. 2. Select Bands 1) Directly input frequency: press the T/F button on the remote control, and then input the frequency that you want. 2) Select band by pressing TU- or TU+ button: under some frequency, press the button, the frequency will be up or down on the step. The step of FM is 0.05 MHz.
DVD MENU SETUP Press the Setup button on the remote control to open the menu setup function, the TV screen will display the following figures. 1. DVD Setup Page 1). OSD Language This option is used to select the language for menu and other screen displays, includes English, French, German, Spanish and Dutch. 2). Audio (Language) While playing DVD disc, the player will automatically play the Pre-selected language, Includes English, French, German, Spanish, Dutch and Others.
DVD MENU SETUP 2. Video Setup Page 1) Video output This option is used to set the video output modes: S-video, YUV and RGB. Note: Make sure that you set the player to the correct video mode. 2) Scan Mode This option is used to select the scan mode: P-scan or interlaced. (This operation is unavailable when the video output mode is set to S-video.) 3) Aspect Ratio(4:3 PS, 4:3 LB, 16:9) *No matter which format you select, if the screen is 4:3 displays, the image is displayed in 4:3.
DVD MENU SETUP 1) Speaker Setup *Downmix mode; LT/RT: left and right soundtrack audio output; Stereo: stereo audio signal output *Dual Mono This option is used to set the mode of audio output, including L-Mono, R-Mono, Mix-Mono, and Stereo. *Dynamic Range This option is used to chosen when Line output is selected for the compression mode. Linear compression ration is adjusted to acquire different compression effects.
DVD MENU SETUP 2). Close Caption When playing DVD disc, set this option OFF to close caption, choose the ON option to open the caption. 3). Screen Saver This option is used to set screen saver on or off. 4). Memory When the option is set to ON, the system automatically remembers the played disc`s contents. The disc is not remembered when the OFF option is selected. 5) S/W Version (Software Version) This option is used to display the mode of this system and its factory name.
SPECIFICATION Disc type DVD, DVCD, VCD, SVCD, CD, CD-R, MP3, MPEG-4 Video format MPEG2 for DVD, and MPEG1 for VCD Audio format MPEG1, MPEG2, PCM, Stereo Signal output Video format: NTSC, PAL, AUTO Video output: 1,0 Vp-p Audio: stereo,2V (RMS) Output Joint Video-output,Audio-output,Chromatic aberation output, S-video output,Optical fiber output, Coaxial output, Scart output Input Joint Audio input facility Power supply ~230 V/ 50 Hz Max.
TROUBLESHOOTING Please use the following methods to solve the following problems while using this unit.
-23-