MC-146 MICRO HIFI-SYSTEM WITH CD/MP3/WMA PLAYER, PLL FM RADIO, CASSETTE, USB SLOT AND CARDREADER INSTRUCTION MANUAL For information and support, www.lenco.
KEY CONTROLS AND FUNCTIONS MAIN UNIT 1) Cassette buttons cover 2) Cassette buttons 3) LCD display 4) Volume knob 5) Function button 6) Alarm button 7) Snooze button 8) Display/ID3 button 9) Play Mode button 10) On/Standby button 11) Preset EQ button 12) USB Socket 13) 3.
The clock setting mode will automatically quit if no button is being pressed in a period of about 5 seconds after pressing the “ Mem/Clk-Adj ” button. The preset time will be reset completely if the unit is being disconnected from the main power supply. You are recommended to switch the system into standby mode for convenience usage. Listening to the radio Manual tuning 1. 2. 3. Switch on the unit by pressing the On/Standby button (10), then press the function button (5) to select “ Tuner ” mode.
Playing MP3/WMA CD 1. After reading the CD, the total number of folders (F) and tracks (T) will be shown on the LCD display (3). The unit will start to play automatically with the first track in the first folder in alphabetical order. Press “ Folder/ Pre (21) or Pre ” at remote control to select the folder number. Press “ Skip Up or Skip Down ” button (19) to select the next or previous track number. 2. 3.
4. 5. 6. 7. Press the “ Mem/Clk-Adj ” button (16) to store the track into memory. Repeat steps 3 and 4 to enter additional tracks into the program memory if necessary. When all the desired tracks have been programmed, press “ Play/Pause ” button (18) to play the tracks in given order. ” button (17) to stop playback, press the Stop button again to clear the program memory.
More features A. Sleep function 1. 2. Press the “ Sleep ” button on the remote control. “SLP-90 “ will be shown on the LCD display (3). Repeatedly press this button to adjust the sleep timer in the order of 90 > 80 > 70 >….10 minutes respectively. The sleep icon “ ” will be shown on the LCD display. 3. The system will stop and go to standby mode automatically after the selected time. 4.
Remote control transmitter The remote control requires 2 pcs “ AAA “ size battery for operation. (Not provided). Control functions Button description 1. On/standby Press to power on / standby the system 2. Mem / Clk-adj In standby mode : press & hold to adjust clock In CD/USD/SD/Tuner mode : press to preset memory 3. Play/pause In CD/USB/SD mode : press to start playback/pause mode 4.
