User Manual

Table Of Contents
18
Connect USB Device And Micro SD Card
“TF”
Follow below picture to connect a USB stick and Micro SD card.
Turn off the projector before connecting the USB/Micro SD card.
Using a Micro SD Card or USB Stick
Connect USB/Micro SD device:
1. Turn off the unit before connecting USB/Micro SD card.
2. Connect the USB device to the USB port.
3. After connecting, press the button to turn on the projector and the
power indicator light up GREEN.
4. Press the
/SOURCE button to enter and use the buttons to search the
MEDIAPLAYER mode.
5. After selection, use the
buttons to search the MUSIC/PHOTO/MOVIE
icon and press the
button to enter, if necessary, use the button to
select Micro SD card or USB and press the button to enter.
6. Use the
buttons to search the correct file and press the button to
preview playback file and press the
button of unit or button of
remote to start playback.
7. Press
button to search forwards and backwards quickly.
8. Press
button to search next or previous file.
9. During playback, press the
button to pause and press again to resume.
NOTE: Remove USB/Micro SD card device, press the button to turn off
power FIRST.
MICRO SD