Operation Manual

 WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH THE
VENTS OR OPENINGS. HIGH VOLTAGE FLOWS THRU THE PRODUCT AND
INSERTING AN OBJECT CAN CAUSE ELECTRIC SHOCK AND/OR SHORT CIRCUIT
INTERNAL PARTS. FOR THE SAME REASON, DO NOT SPILL WATER OR LIQUID
ON THE PRODUCT.
 Do NOT use in wet or moist areas such as bathrooms, steamy kitchens or near
swimming pools.
 Do not use this device when condensation may occur.
This speaker is produced according to all current safety regulations. The following safety tips
should safeguard users against careless use and dangers involved with such use.
 Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all electrical
appliances. If you notice smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the main power socket immediately.
 This device must be well ventilated at all time!
 This device must operate on a power source as specified on the specification label. If you
are not sure of the type of power supply used in your home, consult your dealer or local
power company.
 The socket outlet must be installed near the equipment and must be easily accessible.
 Do not overload AC outlets or extension cords. Overloading can cause fire or electric
shock.
 Devices with Class 1 construction should be connected to a main socket outlet with a
protective earthed connection.
 Devices with Class 2 construction do not require a earthed connection.
 Keep away from rodents. Rodents enjoy biting on power cords.
 Always hold the plug when pulling it out of the main supply socket. Do not pull the power
cord. This can cause a short circuit.
 Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
 To protect the device during a thunderstorm, unplug the AC power cable and disconnect
the aerial. Caution: Do not touch the aerial (RF) connector.
 When the device is not in use for long periods, unplug the AC power cable for safety
reasons.
 To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To
remove severe stains, you may use a damp cloth with dilute detergent.
 The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
 If the device will not be used for an extended period, please charge the battery at least
once per month to maintain battery life.
 Charge the battery if:
a) The battery level icon displays (An empty battery)
b) The device switches off automatically when restarted.