For more information and support, please visit www.lenco.
DVT-2232 USER MANUAL BENUTZERHANDBUCH GEBRUIKSAANWIJZING For more information and support, please visit www.lenco.
TO THE CUSTOMER: Thank you for purchasing this LCD TV. When opening the box for the first time, please check whether all the accessories are present. Before connecting parts and power, please carefully read the user manual and always keep these instructions handy and close by your LCD TV. Contents TV................................................................................ Safety precaution...........................................................................................2 Accessories........
1.Safety precaution Notes: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insinuated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO AUTHORISED SERVICE PERSONNEL.
SAFETY WARNINGS Before using this product, read and follow all warnings and instructions. This product is not intended for use by young children. Young children should be properly supervised. This product is intended for household use only and not for commercial or industrial use. Do not expose to dripping or splashing. No naked flame sources, such as lighted candles, should be placed on the product. Allow suitable distances around the product for sufficient ventilation.
3.
4.Remote control functions POWER: Power on/off button , press once to turn the TV on and press again to turn the TV off. SLEEP: Sleep button , setting TV power off time. MUTE: Mute button , press once to disable the audio and press again to enable the audio. 0,1-9: TV channel selection button. ASPECT:ASPECT button,display format. : Previous channel button , return to the previous channel watched. SOURCE: Signal source selection button (TV/DVD/YPBPR/SCART/VGA/HDMI/SVIDEO). P.STD: P.
5.TELETEXT function buttons Press this button once, turn on the teletext function, Press twice, enter picture and text mix mode. Press once more, turn off the teletext function. After searching for some page, press this key once to go back to the text mode. While the searching result will be displayed at the top of the TV picture, press again to go back to the text mode.
6.LCD TV panel overview TV Control Panel 6 3 4 5 2 LABEL 7 to back 1.On/off button. 2.Selecting exterior signal input. 3.Main menu display and confirm. 4.Channel selecting. 5.Volume adjusting. 6.PLAY/PAUSE 7.OPEN/CLOSE button Insert DVD with Label to the Back TV Terminal connections Y PB PR 1. DC 12V power input. 2. HDMI input. 3. VGA input. 4. SCART input terminal ,suitable for a European export machine. 5. Component input terminal. 6. PC audio input. 7. Headphone output. 8.
7.Connecting to external devices RCA terminal is used to connect the output device of DVD HDMI The rear of TV YPBPR DVD S Video COAXIAL DC-12V HDMI VGA SCART Y PB PC PR AUDIO VCR Notes: 1.VGA/YPBPR/S-Video use a common PC Audio in. 2.SCART to SCART from a VCR. 3.YPBPR from a DVD. 4.
8.The OSD menus Menu Setup TV (When using for the first time only) Initial Setup Welcome 1. Turn on TV, Please press"OK" to start the wizard Welcome to use the Wizard for Initial Setup !! Please press [OK] to start the wizard. Language Initial Setup Please select your language: English 2. Please select your language Espanol Francais Deutsch Nederlands Back Next Select EXIT Exit Country Initial Setup Austria Please select your country: 3 .
Menu Operation Under TV Input Video Audio TV Picture Mode 50 Contrast 50 Saturation 50 Sharpness Setup 1 VIDEO MENU User Brightness 4 DNR Medium Color Temperature Parental Video OK Video Video Audio TV Color Temperature Enter Select EXIT Exit User R Gain 0 G Gain 0 B Gain 0 4 Setup Parental Color Temperature Select EXIT Exit a. The following picture is the sketch map of the video menu. b. The definition of each option: b-1.
Video Video Audio TV Balance 0 Bass 50 Treble 50 Sound Surround On Equalizer Off Setup Parental Audio OK Video Video Audio Enter Select EXIT Exit Country Spain Audio channel Stereo Channels TV Setup Parental TV OK Enter Select EXIT Exit 2 AUDIO MENU a. The following picture is the sketch map of the audio menu. b. The definition of each option: b-1. Balance: Change the value of Balance with the key / in the range of -50 to +50. b-2.
Video Video The submenu of Channel Item Channel Scan Update Scan Audio TV b-3-1. Channel Scan Auto channel searching. Manual Scan G Gain Skip Channel b-3-2. Update Scan Searching added channel. B Gain Sort Channel Setup Channel Edit Channel Decode Parental Analog Channel Fine Tune b-3-3. Manual Scan: manual channel searching b-3-4. Channel Skip Set skip function. b-3-5. Channel Sort Sorting channel. OK Channels Scan Select EXIT Exit b-3-6. Channel Edit Edit channel information. b-3-7.
Video Video Audio TV Setup Parental 1 Digital arte 2 Digital phoenix 3 Digital Das Erste 4 Digital WDR Dortmund 5 Digital WDR Dusseldorf 6 Digital WDR Essen 900 Analog 901 Analog 902 Analog 903 Analog Channels Skip Video Video Audio TV Setup Parental OK Video Video Audio TV Setup Parental BBC1 Select EXIT Exit Set Digital arte 2 Digital phoenix 3 Digital Das Erste 4 Digital WDR Dortmund 5 Digital WDR Dusseldorf 6 Digital WDR Essen 900 Analog 901 Analog
Video Video Audio TV Setup Parental 900 Analog 901 Analog 902 Analog BBC1 903 Analog BBC1 904 Analog 905 Analog 906 Analog 907 Analog 908 Analog 909 Analog OK Channels Decode Video Video Audio TV Setup Parental Set Select EXIT Exit 900 48.5MHz 901 62.25MHz 902 BBC1 128.3MHz 903 BBC1 136.25MHz 904 152.25MHz 905 200.25MHz 906 216.2MHz 907 631.3MHz 908 636.8MHz 909 Analog Channel Fine Tune Video Video b- 3- 7.
Video Video Audio TV OSD Language English Screen Mode Auto OSD TIMEOUT Short OSD Transparency Middle Time Setup Setup Parental Subtitle Digital Teletext Language English Decoding Page Language WEST EUR Blue Mute On Reset Default Setup OK Enter Select EXIT Exit 4 Setup MENU a. This menu is used to set the function b. The definition of each option: b-1. OSD Language: Change the OSD language in the sequence as: English Espanol Francais Deutsch Nederlands . b-2.
Video Video Time Zone As Broadcaster Time Audio TV Setup Parental Time Setup Video Video Audio Select EXIT Exit Analog Subtitle Off Digital Subtitle Language Off Subtitle Type Normal TV Setup Parental Subtitle The Submenu of Time Setup b-5-1. Time Zone: Change the time zone by user. b-5-2. Time set the time. and set power on/off time. Select EXIT Exit The submenu of Subtitle Item. b-6-1. Analog Subtitle: Change the analog subtitle in the sequence as: Off On b-6-2.
Video Video 5 . Parental menu Password a. This menu is used to set the block function. Password set the child lock password, the initial password is 0000.
Video Video Audio TV Setup 1 Digital arte 2 Digital phoenix 3 Digital Das Erste 4 Digital WDR Dortmund 5 Digital WDR Dusseldorf 6 Digital WDR Essen 900 Analog 901 Analog 902 Analog BBC1 903 Analog BBC1 b-2. The submenu of channel block. If you select any of the channel, the channe l can not receive signal unless you unblock it. Parental Channel Block Video Video OK Age Rating Set Select EXIT Exit b-3 . The submenu of program block.
Video Video b-5. The submenu of change password. You need to input the new password and confirm it. New Password Confirm Password Audio TV Setup Parental EXIT Exit Change Password Are you sure? OK Cancel b-6. The submenu of Clean All. Press OK to clean your set or cancel to return the previous menu.
Main menu under VGA Input Video Video Auto Adjust 61 H.Position Audio VGA V.Position 52 Phase 18 Clock 145 Setup a. When system signal source switch to VGA, there will be a VGA mark in the upleft corner of the screen, it is in the VGA menu ,and you can setup the item. Parental OK VGA Enter Select EXIT Exit a-1. Auto Adjust: set position and size of the picture automaticlly. a-2. H.Position: Adjust the H-Psition of the picture. you can set the value range 0-100. a-3. V.
DVD Operation
Basic operation 1. Turn ON and OFF the DVD function - Turn on the LCD TV and then press SOURCE repeatedly to select DVD mode. 2. Insert Disc to DVD - Insert the Disc to the Disc slot (Data side of the disc has to face towards front of the unit), the player will load the disc automatically. There will have an on screen indication “CLOSE” then “READ”. After loading the disc content, it will switch to play mode automatically. If the disc is already placed inside, the disc will be read automatically.
Supporting DVD format This products can play the following format of DVD disc. Disc Type Disc Size (Diameter) Recorded Time Recorded Content Remarks DVD format: Compressed digital audio and video Single side:120mins. Approx DVD 12cm Super VCD 12cm 45mins. Approx MPEG2 Compressed digital audio and video Include SVCD VCD 12cm 74mins. Approx MPEG1 Compressed digital audio and video Include: VCD2.0/ VCD1.1 VCD1.0/ DVCD CD 12cm 74mins. Approx CD-DA: Digital audio HD-CD 12cm 74mins.
1. Play (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) - For DVD disc, press button from root or title menu; while playing the DVD, you may play your favorite title directly with title selection by pressing the TITLE button. - For Super VCD & VCD discs, while playing the disc, you may play your favorite tracks by numeric buttons. - For CD, CD-G & HD-CD discs, while playing the disc, you may play your favorite tracks by numeric buttons.
For DVD discs, (2 pages) Press INFO button once to display first page as shown below: Disc Type Chapter Tiltle -/-(Current/Full) Elapsed disc time -/- (Current/ Full) Press the INFO button again to display the second page shown below: Audio Language -/- (Current/ Full) or OFF Audio Type Angle ON/OFF Subtitle -/-(Current/Full)or OFF Press INFO button again to turn off the on screen display.
10. Mute (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) - Press MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”. - Press again to cancel, or Press VOL+/VOL - to cancel and adjust the volume. - In case there is no audio output, try to press MUTE button to cancel mute. 11. Repeat A- B (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) When playing DVD ,VCD,CD disc,press A-B button to repeat a certain conternts.
- Using the navigation buttons to check you favorite folder and playback the first file or move to the your favorite file. NOTE: - Press buttons to move the highlight to folders, documents or mode selection. - Press numeric buttons to select the contents directly. For number over 10, press -/-- button first. (e.g. File number 15, press -/-- then 5.) - When playback MP3 files, there is no picture display, only audio output.
PARENTAL NOTE: PAL format is generally used for TVs in the UK. Check your TV user guide for supported formats. If NTSC is selected with a non-compatible television you may experience interference or picture scrolling. TV Type DVDs are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios: 4:3 PS (Normal) 4:3 LB (Normal) 16:9 (Wide) PARENTAL - Select the most appropriate aspect ratio for the DVD being viewed.
NOTE: Only editable when password is unlocked. And only can function when password is locked. It does not, however, reset either the Password or the PARENTAL setting. PARENTAL Default Setting PARENTAL - Press ok button to restore factory default. Language Setup Press SETUP button to enter the DVD OSD menu. FRENCH GERMAN SPANISH NETHERLANDS - OSD Language Use navigation buttons to select the OSD LANGAUGE setup icon, press OK button to confirm.
NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc automatically. The default language setting is English. MENU Language GERMAN SPANISH FRENCH NETHERLANDS - Use navigation buttons to select the MENU LANG setup icon, press OK button to confirm. There are 5languages for you selection, press & buttons to toggle between different languages. Press OK button to confirm. Audio Setup Audio out - Use & buttons to adjust the Audio out setting.
Dolby Digital Setup Dynamic Range - When switch the compress mode to “Audio output”, adjust the compress ratio for different effect. When selected FULL, the peak signal value is smallest. When selected OFF, the peak signal value is biggest. Dual Mono - You can select four different audio output, STEREO, MONO L, MONO R, MIX MONO. The audio out description of these Selections is shown in the table below.
Trouble shooting Before contrast the service technician, perform the following simple checks. If any program still persists, unplug the LCD TV and calling for serving. PROBLEM POSSIBLE SOLUTION No sound and picture - Check that the main plug has been connected to a wall let. - Check that you have pressed the POWER button on the front of TV set. - Check the picture contrast and brightness settings. Normal picture but no sound - The remote control does not work Check the volume.
NOTE: There is a problem in VGA mode.(Only VGA mode applied) PROBLEM The signal is out of range. Vertical bar or stripe on back ground&Horizontal Noise&Incorrect position. Screen color is unstable or single color. POSSIBLE SOLUTION - Adjust resolution, horizontal frequency, or vertical frequency. - Check it whether the signal cable is connected or loose. - Check the input source. - Work the auto configure or adjust clock, phase, or H/V position. - Check the signal cable.
Specifications Panel Features Screen Size Active Area Aspect Ratio 22 inch 473.76mm(H) X 296.1mm(V) Panel Resolution Brightness 1680 X 1050 300 cd/m² Contrast Ratio Viewing Angle 1000:1 16:10 170º(H) X 160º (V) 0.282mm(H) X 0.282mm(V) Dot Pitch Maximum Colour 16.
