DVT-1932 USER MANUAL BENUTZERHANDBUCH GEBRUIKSAANWIJZING
TO THE CUSTOMER: Thank you for purchasing this LCD TV. When opening the box for the first time, please check whether all the accessories are present. Before connecting parts and power, please carefully read the user manual and always keep these instructions handy and close by your LCD TV. Contents TV................................................................................ Safety precaution...........................................................................................2 Accessories........
1.Safety precaution Notes: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insinuated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO AUTHORISED SERVICE PERSONNEL.
SAFETY WARNINGS Before using this product, read and follow all warnings and instructions. This product is not intended for use by young children. Young children should be properly supervised. This product is intended for household use only and not for commercial or industrial use. Do not expose to dripping or splashing. No naked flame sources, such as lighted candles, should be placed on the product. Allow suitable distances around the product for sufficient ventilation.
3.
4.Remote control functions POWER: Power on/off button , press once to turn the TV on and press again to turn the TV off. SLEEP: Sleep button , setting TV power off time. MUTE: Mute button , press once to disable the audio and press again to enable the audio. 0,1-9: TV channel selection button. ASPECT:ASPECT button,display format. : Previous channel button , return to the previous channel watched. SOURCE: Signal source selection button (TV/DVD/YPBPR/SCART/VGA/HDMI/SVIDEO). P.STD: P.
5.TELETEXT function buttons Press this button once, turn on the teletext function, Press twice, enter picture and text mix mode. Press once more, turn off the teletext function. After searching for some page, press this key once to go back to the text mode. While the searching result will be displayed at the top of the TV picture, press again to go back to the text mode.
6.LCD TV panel overview TV Control Panel 6 3 4 5 2 LABEL 7 to back 1.On/off button. 2.Selecting exterior signal input. 3.Main menu display and confirm. 4.Channel selecting. 5.Volume adjusting. 6.PLAY/PAUSE 7.OPEN/CLOSE button Insert DVD with Label to the Back TV Terminal connections Y PB PR 1. DC 12V power input. 2. HDMI input. 3. VGA input. 4. SCART input terminal ,suitable for a European export machine. 5. Component input terminal. 6. PC audio input. 7. Headphone output. 8.
7.Connecting to external devices RCA terminal is used to connect the output device of DVD HDMI The rear of TV YPBPR DVD S Video COAXIAL DC-12V HDMI VGA SCART Y PB PC PR AUDIO VCR Notes: 1.VGA/YPBPR/S-Video use a common PC Audio in. 2.SCART to SCART from a VCR. 3.YPBPR from a DVD. 4.
8.The OSD menus Menu Setup TV (When using for the first time only) 1. Turn on TV, Please press"OK" to start the wizard 2. Please select your language 3 . Please select your country 4.
Menu Operation Under TV Input 1 VIDEO MENU a. The following picture is the sketch map of the video menu. b. The definition of each option: b-1. Picture Mode: Change the picture mode in the sequence as: Sta nda rd Cinema Sport Vivid Hi-Bright User b-2. Brightness: Change the value of brightness with the key / in the range of 0 to 100. b-3. Contrast: Change the value of contrast with the key / in the range of 0 to 100. b-4. Saturation: Change the value of saturation with the key / in the range of 0 to 100.
2 AUDIO MENU a. The following picture is the sketch map of the audio menu. b. The definition of each option: b-1. Balance: Change the value of Balance with the key / in the range of -50 to +50. b-2. Bass: Change the value of Bass with the key / in the range of 0 to 100. b-3. Treble: Change the value of Treble with the key / in the range of 0 to 100. b-4. Sound Surround: Change the sound surround in the sequence as: On Off. b-5.
The submenu of Channel Item b-3-1. Channel Scan Auto channel searching. b-3-2. Update Scan Searching added channel. b-3-3. Manual Scan: manual channel searching b-3-4. Channel Skip Set skip function. b-3-5. Channel Sort Sorting channel. b-3-6. Channel Edit Edit channel information. b-3-7. Channel Decode: Decode function. b-3-8. Analog Channel Fine Tune Fine tuning. b-3-1/2. The submenu of Channel Scan and update Scan Item These two items are used for searching channels.
b-3-4. The submenu of Channel Skip The channel skip is used for skipping the channel. b-3-5. The submenu of Channel Sort Item The channel sort is used for changing the channel. b-3-6. The submenu of Channel Edit The channel edit is used for editing the channel items. Press numeric button to edit channel name: 1: A / B / C / 1 2: D / E / F / 2. 3: G / H / I / 3 4: J / K / L / 4 5: M / N / O / 5 6: P / Q / R /6 7: S / T / U / 7 8: V / W / X / 8 9: Y / Z / 9 0: + / - / .
b- 3- 7. The submenu of Analog Channel Decode The channel decode is used for decoding the channel. b-3-8. The submenu of Analog Channel Fine Tune This item shows the frequency of each program.
4 Setup MENU a. This menu is used to set the function b. The definition of each option: b-1. OSD Language: Change the OSD language in the sequence as: English Espanol Francais Deutsch Nederlands . b-2. Screen Mode: Change the screen mode in the sequence as: Auto 16:9 4:3. b-3. OSD TIMEOUT: set the showing time of OSD Menu in the sequence as: Short Middle Long. b-4. OSD Transparency: set the transparency of the OSD Menu in the sequence as: Middle Low Hight. b-5.
The Submenu of Time Setup b-5-1. Time Zone: Change the time zone by user. b-5-2. Time set the time. and set power on/off time. The submenu of Subtitle Item. b-6-1. Analog Subtitle: Change the analog subtitle in the sequence as: Off On b-6-2. Digital Subtitle Language: Change the subtitle language in the sequence as: Off English Espanol Francais Deutsch Nederlands . b-6-3. Subtitle Type: Change the subtitle type in the sequence as: Normal Hearing Impaired.
5 . Parental menu a. This menu is used to set the block function. Password set the child lock password, the initial password is 0000. b. The Submenu after You Enter the Correct Password. b-1. Hotel block : Hotel mode set b-2. Channel block: block the channel b-3. Program block: block the program b-4. Input block: you can block any of the source. b-5. Change password: change the parental password. b-6. Clean all: restore your set. b-1.
b-2. The submenu of channel block. If you select any of the channel, the channe l can not receive signal unless you unblock it. b-3 . The submenu of program block. Age Rating: The program will be blocked if the age you set is below that the program confine. b-4. The submenu of input block. If you select any of the source ,the source can not be used unless you unblock it.
b-5. The submenu of change password. You need to input the new password and confirm it. b-6. The submenu of Clean All. Press OK to clean your set or cancel to return the previous menu.
Main menu under VGA Input a. When system signal source switch to VGA, there will be a VGA mark in the upleft corner of the screen, it is in the VGA menu ,and you can setup the item. a-1. Auto Adjust: set position and size of the picture automaticlly. a-2. H.Position: Adjust the H-Psition of the picture. you can set the value range 0-100. a-3. V.Positon: Adjust the V-Psition of the picture. you can set the value range 0-100. a-4. Phase: Adjust the phase of the picture. you can set the value range 0-31. a-5.
DVD Operation
Basic operation 1. Turn ON and OFF the DVD function - Turn on the LCD TV and then press SOURCE repeatedly to select DVD mode. 2. Insert Disc to DVD - Insert the Disc to the Disc slot (Data side of the disc has to face towards front of the unit), the player will load the disc automatically. There will have an on screen indication “CLOSE” then “READ”. After loading the disc content, it will switch to play mode automatically. If the disc is already placed inside, the disc will be read automatically.
Supporting DVD format This products can play the following format of DVD disc. Disc Type Disc Size (Diameter) Recorded Time Recorded Content Remarks DVD format: Compressed digital audio and video Single side:120mins. Approx DVD 12cm Super VCD 12cm 45mins. Approx MPEG2 Compressed digital audio and video Include SVCD VCD 12cm 74mins. Approx MPEG1 Compressed digital audio and video Include: VCD2.0/ VCD1.1 VCD1.0/ DVCD CD 12cm 74mins. Approx CD-DA: Digital audio HD-CD 12cm 74mins.
1. Play (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) - For DVD disc, press button from root or title menu; while playing the DVD, you may play your favorite title directly with title selection by pressing the TITLE button. - For Super VCD & VCD discs, while playing the disc, you may play your favorite tracks by numeric buttons. - For CD, CD-G & HD-CD discs, while playing the disc, you may play your favorite tracks by numeric buttons.
For DVD discs, (2 pages) Press INFO button once to display first page as shown below: Disc Type Chapter Tiltle -/-(Current/Full) Elapsed disc time -/- (Current/ Full) Press the INFO button again to display the second page shown below: Audio Language -/- (Current/ Full) or OFF Audio Type Angle ON/OFF Subtitle -/-(Current/Full)or OFF Press INFO button again to turn off the on screen display.
10. Mute (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) - Press MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”. - Press again to cancel, or Press VOL+/VOL - to cancel and adjust the volume. - In case there is no audio output, try to press MUTE button to cancel mute. 11. Repeat A- B (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG discs) When playing DVD ,VCD,CD disc,press A-B button to repeat a certain conternts.
- Using the navigation buttons to check you favorite folder and playback the first file or move to the your favorite file. NOTE: - Press buttons to move the highlight to folders, documents or mode selection. - Press numeric buttons to select the contents directly. For number over 10, press -/-- button first. (e.g. File number 15, press -/-- then 5.) - When playback MP3 files, there is no picture display, only audio output.
PARENTAL NOTE: PAL format is generally used for TVs in the UK. Check your TV user guide for supported formats. If NTSC is selected with a non-compatible television you may experience interference or picture scrolling. TV Type DVDs are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios: 4:3 PS (Normal) 4:3 LB (Normal) 16:9 (Wide) PARENTAL - Select the most appropriate aspect ratio for the DVD being viewed.
NOTE: Only editable when password is unlocked. And only can function when password is locked. It does not, however, reset either the Password or the PARENTAL setting. PARENTAL Default Setting PARENTAL - Press ok button to restore factory default. Language Setup Press SETUP button to enter the DVD OSD menu. FRENCH GERMAN SPANISH NETHERLANDS - OSD Language Use navigation buttons to select the OSD LANGAUGE setup icon, press OK button to confirm.
NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc automatically. The default language setting is English. MENU Language GERMAN SPANISH FRENCH NETHERLANDS - Use navigation buttons to select the MENU LANG setup icon, press OK button to confirm. There are 5languages for you selection, press & buttons to toggle between different languages. Press OK button to confirm. Audio Setup Audio out - Use & buttons to adjust the Audio out setting.
Dolby Digital Setup Dynamic Range - When switch the compress mode to “Audio output”, adjust the compress ratio for different effect. When selected FULL, the peak signal value is smallest. When selected OFF, the peak signal value is biggest. Dual Mono - You can select four different audio output, STEREO, MONO L, MONO R, MIX MONO. The audio out description of these Selections is shown in the table below.
Trouble shooting Before contrast the service technician, perform the following simple checks. If any program still persists, unplug the LCD TV and calling for serving. PROBLEM POSSIBLE SOLUTION No sound and picture - Check that the main plug has been connected to a wall let. - Check that you have pressed the POWER button on the front of TV set. - Check the picture contrast and brightness settings. Normal picture but no sound - The remote control does not work Check the volume.
NOTE: There is a problem in VGA mode.(Only VGA mode applied) PROBLEM The signal is out of range. Vertical bar or stripe on back ground&Horizontal Noise&Incorrect position. Screen color is unstable or single color. POSSIBLE SOLUTION - Adjust resolution, horizontal frequency, or vertical frequency. - Check it whether the signal cable is connected or loose. - Check the input source. - Work the auto configure or adjust clock, phase, or H/V position. - Check the signal cable.
Specifications Panel Features Screen Size Active Area Aspect Ratio 19 inch 408.24mm(H) X 255.15mm(V) Panel Resolution Brightness 1440 X 900 300 cd/m² Contrast Ratio Viewing Angle 1000:1 16:10 150º(H) X 130º (V) 0.243mm(H) X 0.243mm(V) Dot Pitch Maximum Colour 16.
