Datasheet

Connecting to a Stereo Component

1.Turn off both DVD player and your stereo system.

2.Connect the SPDIF to your stereo system as illustrated below.

3.Slide INPUT/OUTP to OUPUT.

4.Turn on power of DVD player.

By connecting the digital output (SPDIF) on the DVD player through a coaxial cable to a Dolby Digital/

DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for

making the connection.

COAXIAL

Coaxial terminal connecting stereo system

SPDIF(black)

Coaxial cable

Depending on your amplifier system, you need to make the following selection from MENU:

1.Refer to page 21 to get to Audio Setup (Adjusting Audio).

2.Select SPDIF/RAW if your amplifier has 5.1-channel decoder.

3.Select SPDIF/PCM if your amplifier has 2 channels.

4.Select OFF, there is no digital signal output from the DVD player.

SPDIF(black)