DVD-322 For information and support, www.lenco.
Content Introduction Important Safety Instructions .................................................................................. 2 Caution ....................................................................................................................3 Features ...................................................................................................................3 Front Panel and Rear Panel Illustration……………………………………………….…4 Remote Control …………………………………………………………………..…….
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug.
Caution • Please use the original box and packing materials for safe transportation of this product. • It is normal for the cover and rear panel to become warm after the player has been operating for an extended period of time. • Do not move this product during playback. Doing so may cause damage to the pickup and the disc. • Press OPEN/CLOSE on the front panel or remote to open or close the disc tray. Do not push or touch the tray while it is opening or closing.
Front Panel and Rear Panel Illustration Front Panel 1. Tray Door 2. Power 3. Open/Close button 4. Play/Pause Button 5. Sensor 6. LED 7. USB port Back Panel 1. Digital Audio Coaxial Output 2.
Remote Control 1. OPEN/CLOSE 14. MUTE 2. POWER 15. GOTO 3. 0-9 NUMBER KEY 16. USB 4. ZOOM/MENU 17.AUDIO/ANGLE 5. SUBTITLE/TITLE 18.REPEAT/ PROGRAM 6. SETUP 19. PLAY/PAUSE 7. UP 20. STOP 8. LEFT 21. RIGHT 9. DOWN 22. OK 10. REVERSE 23. VOLUME INCREASE 11. FORWARD 24. VOLUME DECREASE 12. PREVIOUS 25. DISPLAY 13. NEXT Note: Press 4, 5, 17, 18 for more than 1.5s, there will be functions marked on these buttons(MENU, TITLE, ANGLE, PROG).
Connections CONNECT DVD PLAYER TO TV SET WITH SCART SOCKET Use the SCART cable to connect DVD player and your TV. Set the [Video Out] to [RGB]. CONNECT DVD PLAYER TO AV AMPLIFIER WITH DIGITAL AUDIO(COAXIAL) OUTPUT 1. Connect the coaxial digital audio output to the AV amplifier. 2. Set the DVD player's [Digital Output] to [Raw] or [PCM] 3. Set the AV Amplifier to the digital input connected to the DVD player.
SYSTEM SETUP Press the SETUP button on the remote control, the SETUP MENU will be displayed. There are three pages named System, DMP and Disc on top of setup menu, press Left/Right button to switch among them, then press Down button to select items you want to set. 1. System Menu 1.1 System Language Setup OSD Use this item to select the language of the setup menu and screen display. Encoding Set correct value to support external subtitle in different language. 1.
SYSTEM SETUP TV Standard Select the different TV system. Note: The DVD player setting should be matched to your TV set. For more information of output format, refer to the instructions or your TV set. Display Type Select the aspect ratio. Notes:The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen.
SYSTEM SETUP 2. DMP Menu 2.1 Photo Settings Interval Time Set interval time during photo slide show Transition Effect Set transition effect for photo slide show Show Type Set fill mode for picture view Color Tone Set color tone 3. Disc Menu 3.
SYSTEM SETUP 3.2 Disc Audio Setup Digital Out Set digital audio output mode for coaxial. Analog out Set analog audio output (on/off) Downmix Set downmix mode for analog output 3.
MP3/WMA/JPEG/MPEG4 PLAYBACK Play MP3/WMA/MPEG4/JPEG in disc or in USB has similar directory structure as below: Using Direction keys to choose file you want to play then press OK or Play/Pause button to start playback. Below picture shows screen display during music file playback. Press USB button to bring out a device selection menu, then you can change file source between disc and USB device. Note: When inserting the USB device, please do not insert in the wrong direction.
PROGRAM PLAY OPERATION Program operation during CDDA, VCD and DVD playback Press PROG button (hold for more than 1.5s) during CDDA/VCD/DVD playback, system will bring out program menu as below. Press up/down button to move highlight in program list for add/delete operation, press right button then select which track/title you want to add into program list, or press stop button to remove the highlighted item from program list. Press OK button to start play highlighted item.
PROGRAM PLAY OPERATION Program operation during MP3/WMA/MPEG4/JPEG files playback Using direction buttons to select file which you want to add to program list, then press Right button to add it. Press PROG button (hold for more than 1.5s) after you added files into program list, system will bring out program menu. In this menu, Press Right button will remove highlighted file from program list, press OK or Play/Pause to start program playback.
Troubleshooting If you have any questions, please consult the troubleshooting guide below. NO PICTURE OR SOUND "BAD DISC" DISPLAYED • Ensure the power button is on. • Ensure the disc is not warped, damaged or deformed. • Ensure the power outlet is operational. • Ensure the disc is not badly stained or damaged. • Ensure the power cord is not damaged. • Ensure the disc format is compatible with the player.
Specifications Power requirements: AC 100-240 Volt, 50/60Hz Power consumption: 15W Video standard: NTSC/PAL Discs Compatibility: MPEG4,DVD,DVD+/-R/RW,VCD,JPEG.CD-DA,CD-R, CD-RW Video out Video out: 1.0V(p-p)/75Q, sync, negative polarity Audio out Audio out level: 2Vrms -1/+0.2 Frequency response: 20Hz to 20kHz S/N ratio: >90dB Total harmonic distortion: <0.025% Accessories Remote Control x 1 User's Manual x 1 Note: Specifications are subject to change without notice. For information and support, www.lenco.
