Lenco DVD-320 For information and support, www.lenco.
Content Introduction Important Safety Instructions .................................................................................... 2 Caution ..................................................................................................................... 3 Features .................................................................................................................... 3 Front Panel and Rear Panel Illustration ....................................................................
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug.
Caution • Please use the original box and packing materials for safe transportation of this product. • It is normal for the cover and rear panel to become warm after the player has been operating for an extended period of time. • Do not move this product during playback. Doing so may cause damage to the pickup and the disc. • Press OPEN/CLOSE on the front panel or remote to open or close the disc tray. Do not push or touch the tray while it is opening or closing.
Front Panel and Rear Panel Illustration Front Panel Back Panel 1. Power 7. Next Button 2. Tray Door 8.USB Port 3. LED 9. Play/Pause Button 4. Sensor 10. Open/Close button 5. Prev Button 11. Digital Audio Coaxial Output 6. Stop Button 12.
Remote Control 1. OPEN/CLOSE 14. MUTE 2. POWER 15. USB 3. 0-9 NUMBER KEY 16.GOTO 4. ZOOM/MENU 17.AUDIO/ANGLE 5. SUBTITLE/TITLE 18.REPEAT/ PROGRAM 6. SETUP 19. PLAY/PAUSE 7. UP 20. STOP 8. LEFT 21. RIGHT 9. DOWN 22. OK 10. REVERSE 23. VOLUME INCREASE 11. FORWARD 24. VOLUME DECREASE 12. PREVIOUS 25. DISPLAY 13. NEXT Note: Press 4, 5, 17, 18 for more than 1.5s, there will be functions marked on these buttons(MENU, TITLE, ANGLE, PROG).
Connections CONNECT DVD PLAYER TO TV SET WITH SCART SOCKET Use the SCART cable to connect DVD player and your TV. Set the [Video Out] to [RGB]. CONNECT DVD PLAYER TO AV AMPLIFIER WITH DIGITAL AUDIO(COAXIAL) OUTPUT 1. Connect the coaxial digital audio output to the AV amplifier. 2. Set the DVD player's [Digital Output] to [Raw] or [PCM] 3. Set the AV Amplifier to the digital input connected to the DVD player.
SYSTEM SETUP MENU OPERATION Press the SETUP button on the remote control, the SETUP MENU will be displayed. Use the up/down buttons for up and down movement trough the menu Press RIGHT direction button to enter the submenu and press left direction button to go back to the previous menu.
SYSTEM SETUP Aspect Ratio Use this option to select the aspect ratio. Notes: The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen. adjust the screen setting depending on the type of the television you have. TV System Select the desired TV system. Note: The DVD player setting should be matched to your TV set.
SYSTEM SETUP RATING SETUP Select Rating in the setup menu, and display the Rating submenu: Parental Control Set the parental control feature of the player Note: Password is needed before setting Parental Control. Set Password Input four digits (password), then press OK to confirm. Note: If you forget your password, please use the universal password 6666 to unlock. MISC SETUP Select MISC in the setup menu, and display the submenu: Use Default Settings Reset setup data to factory default value.
MP3/WMA/JPEG/MPEG4 PLAYBACK The MP3/WMA/MPEG4 disc has such a directory structure as shown picture above. Press Direction key to choose the root directory and then press ENTER button to enter the sub directory. Use Direction keys to choose the desired track and press OK to play the selected file. To return to the upper menu, press Direction keys and choose , press OK button to go back to the upper menu. Use direction keys to enter the play settings menu (right part of the screen).
PHOTO CD PLAYBACK The PHOTO CD disc has such a directory structure structure as shown in the following picture. Press Direction key to choose the root directory and then press OK button to enter into the sub directory. Press Direction key to choose the desired picture and then press OK to open the picture. Once opened a picture the slideshow will start automatically. Press Play/Pause button to pause or resume the playback of the slideshow.
Troubleshooting If you have any questions, please consult the troubleshooting guide below. NO PICTURE OR SOUND "BAD DISC" DISPLAYED • Ensure the power button is on. • Ensure the disc is not warped, damaged or deformed. • Ensure the power outlet is operational. • Ensure the disc is not badly stained or damaged. • Ensure the power cord is not damaged. • Ensure the disc format is compatible with the player.
Specifications Power requirements: AC 100-240 Volt, 50/60Hz Power consumption: 15W Video standard: NTSC/PAL Discs Compatibility: MPEG4,DVD,DVD+/-R/RW,VCD,JPEG.CD-DA,CD-R, CD-RW Video out Video out: 1.0V(p-p)/75Ω, sync, negative polarity Audio out Audio out level: 2Vrms -1/+0.2 Frequency response: 20Hz to 20kHz S/N ratio: >90dB Total harmonic distortion: <0.025% Accessories Remote Control x 1 User's Manual x 1 Note: Specifications are subject to change without notice. For information and support, www.lenco.
