7” Digital photo frame Model No.: DF-704 For information and support, www.lenco.
PARTS LIST 1 Setup 2 Exit 3 Right 4 Left 5 Play/Pause/on/off 5 4 3 2 1 OPERATION METHOD 1) Please use the 5V DC power adapter supplied with this product. 2) Please remove the power adapter from the main outlet before cleaning the unit. 3) Clean the case, LCD screen and buttons with slightly damp, soft cloth. DO not use coarse cloth, sprayers or chemical cleaners such as alcohol, benzene, etc. Do not allow residue to enter the DC power socket or SD/MMC/MS slot. TECHNICAL SPECIFICATION Power:5V 1.
Operation: 1. When a SD/MMC/MS card is inserted, the frame would slideshow automatically. Press “Exit” and a photo thumbnail shall appear 1.1 1.2 Press Left/Right Buttons to select the picture Press Play button to enter single photo display mode and display the selected picture, Press Play button again to enter slideshow mode 1.3 Press”On&Off”button for about 2-3 seconds to turn off the frame and another 2--3 seconds if you want to turn on the frame again.
2.1 2.2 2.3 2.4 2.5 2.6 Select Version and press Play button to display the information of the photo Select Save As Background and press Play button to save the photo as start-up logo Select Delete and press Play button to delete the photo Select Zoom and press Play button to zoom in or out the photo Select Rotate and press Play button to rotate the photo by 90°/180°/270°/360° Select Exit and press Play button to return to thumbnail 3.
Play button to confirm selection. A bar shall appear, use Left/Right arrows to adjust the property and press Play button to confirm. ( Press Exit to leave setting) Select OSD Language and then press Play button to show OSD options: English/French/Spanish/ Dutch/German. use Left/Right arrows to select desired OSD language and press Play button to confirm.