Datasheet

ManualsBrandsLenco Manualscar media receiversCS176USBENCODING

Mounting angle adjustment

Adjust the mounting angle to less than 30°.

MOUNTING EXAMPLE

Installation in the dashboard

Note: Keep the release key in the safe place as you may need it in future to remove the

unit from the car.

Detaching and attaching the front panel

The front panel of this unit can be detached in order to prevent the unit from being stolen.

DETACHING THE FRONT PANEL

Before detaching the front panel, be sure to

press the PWR button to turn off the unit first.

Then press the button and detach the panel

by pulling it towards you as illustrated.

Note: Be sure not to drop the panel when

detaching it from the unit.

ATTACHING THE FRONT PANEL

Make sure the front panel is the right way up when attaching it to the unit as it cannot be

attached upside down. Bring side B of panel to side A of main unit.

Inset the panel in and push until it clicks.

Panel is attached.

Notes:

• Do not press the front panel hard against the unit when attaching it. It can be easily

attached by pressing it lightly against the unit.

• When you carry the front panel with you, put it in the supplied front panel case.

• Do not press hard or give excessive pressure to the display window of the front panel

when attaching it to the unit.

ISO CONNECTOR

RCA Jack Line Out(Rear)-Gray

:Red(right)

:White(left)

CONNECTOR A

4. MEMORY +12V

5. AUTO ANTENNA OUTPUT

7.+12V (TO IGNITION KEY)

8. GROUND

Note:

The connector A no.7 must be connected by car ignition key in order to avoid that car

battery becomes weak when the car will be not used for long period.

CONNECTOR B

1. REAR RIGHT SPEAKER(+)

2. REAR RIGHT SPEAKER(-)

3. FRONT RIGHT SPEAKER(+)

4. FRONT RIGHT SPEAKER(-)

5 FRONT LEFT SPEAKER(+)

6 FRONT LEFT SPEAKER(-)

7. REAR LEFT SPEAKER(+)

8. REAR LEFT SPEAKER(-)

3 3

EnglishEnglish

4 4