BT-125 3D SOUND SPEAKER ® WITH BLUETOOTH User's Guide www.lenco.com 201307 v1.
Important safety instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water.
B. The unit has been exposed to rain. C. The unit has been dropped or the enclosure damaged. D. The unit exhibits a marked change in performance or does not operate normally. 12. Servicing The user should not attempt to service the unit beyond those methods described in the user's operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
Apple devices like iPad/iPhone/iPod, smart phones and/or tablet are not included. Description of parts Front View Rear View 1. Six wave field synthesis (WFS) speakers 2. NFC sensor The NFC (Near Field Communication) sensor located at middle top of the unit. 3. FUNC. button The function button, press to select Bluetooth or AUX-IN mode. ® 4. VOLUME + / - button Adjust volume level up or down. 5. POWER Turn the unit on or off. button 6. Status LED indicator 7. AC socket Power supply to the unit.
The unit plays from mobile devices (like, iPad/iPhone/iPod Touch ,Smart phone and tablet) music through Bluetooth® operation. It also incorporated NFC (Near Field Communication) function for easy connection with a mobile device which also has the NFC function. ® (A) NFC Bluetooth pairing / connection 1. Press the POWER button to turn on the unit. 2. 3. 4. 5. 6. Press the FUNC (function) button to select Bluetooth® mode, where the blue Status LED indicator blinks fast.
Note: Whilst the blue Status LED indicator blinks (3 minutes) fast, the unit is searching mobile device for pairing. Whilst the blue Status LED indicator blinks slowly, it means that the Bluetooth® communication st ® disconnected or after the 1 three searching minutes. To establish the Bluetooth connection, implement the 3 approaches (A), (B) or (C) mentioned in above sections.
Technical Data Power Supply for the unit AC 100 - 240V ~ 50/60Hz USB connector USB power source, output DC 5V (Maximum 1000mA) (for charging external appropriate mobile device battery) Speaker Output Total 15W x 6 + 35W (Max.) Operating temperature and Humidity 0 ~ +35 degree C 70% Service and support For information: www.lenco.com For support: http://lencosupport.zendesk.
Products with a CE marking comply with the EMC directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the European Commission of the European Community. When you see a crossed-out wheeled waste container on the product, it means that the product is subject to the EU directive 2002/96/EC. This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe.
