Datasheet

24 www.lemo.com
®®
FGY 2B
FGY 3B
FGY 4B
13.5 43.0 32.0 10
19.0 62.0 47.0 15
26.0 78.5 60.5 20
ø A
~M
~L
S 2
FGG Straight plug, key (G or J), cable collet,
PEEK outer shell
~M
~L
ø A
S 2
FGY Straight plug, keys (Y), cable collet
and PSU or PPSU outer shell
Reference
Model Series
Dimensions (mm)
ALMS2
FGG 1B
FGG 3B
FGG 4B
16.5 50.5 39.5 13
19.0 58.0 43.0 15
26.0 76.2 58.2 20
Reference
Model Series
Dimensions (mm)
ALMS2
Standard
These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The
design, including a latch sleeve and a metal earthing crown, guarantees EMC screening efficiency to meet most requirements.
natural (beige) white or grey cream –
> 5000 cycles > 5000 cycles > 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C –
- 50° C/+250° C - 50° C/+150° C - 50° C/+180° C –
> 200 cycles ~20 cycles > 100 cycles IEC 60601-1 § 44.7
very good limited good –
Colour
Endurance
Humidity
Temperature range
Sterilization resistance
1)
Resistance to solvents
Characteristics
Mechanical and Climatical
Technical Characteristics
Value
PEEK PSU PPSU
Note:
1)
Steam sterilization
M1
Cable assembly (page 161)
M1
Cable assembly (page 161)
Plastic housing models
ø A
~M
~L
S 2
FGG Straight plug, key (G or J), cable collet, PEEK
outer shell and nut for fitting a bend relief
1)
Reference
Model Series
FGG 1B
FGG 4B
Note:
1)
to order, add a «Z» at the end of the reference.
The bend relief must be ordered separately (see page 141).
M1
Cable assembly (page 161)
13.5 42.2 31.2 10
26.0 83.2 65.2 20
Dimensions (mm)
ALMS2
for all collet type
only from collet M82 and up
Note on availability