Datasheet

LEM reserves the right to carry out modications on its transducers, in order to improve them, without prior notice.

110210/11

www.lem.com

Page 3/3

Connection

Dimensions LF 305-S (in mm.)

Mechanical characteristics

General tolerance ± 0.5 mm ●

Transducer fastening ●

Vertical position 2 holes Ø 4.3 mm

2 M4 steel screws

Recommended fastening torque 3.2 Nm

or 4 holes Ø 1.9 mm,

depth: 7 mm

4 PTKA 25 screws

length: 6 mm

Recommended fastening torque 0.7 Nm

Transducer fastening ●

Horizontal position 4 holes Ø 4.3 mm

4 M4 steel screws

Recommended fastening torque 3.2 Nm

or 4 holes Ø 1.9 mm

crossing

4 PTKA 25 screws,

length: 10 mm

Recommended fastening torque 0.75 Nm

Primary through-hole Ø 20.1 mm ●

Connection of secondary Molex 6410 ●

3 Tin plated pins

Remarks

I ●

is positive when I

ows in the direction of the arrow.

Temperature of the primary conductor should not exceed ●

100°C.

Dynamic performances (di/dt and response time) are ●

best with a single bar completely lling the primary hole.

This is a standard model. For different versions (supply ●

voltage, turns ratios, unidirectional measurements ...),

please contact us.