Replacement Part List

LEM Products t West Chester, OH 45011 t PH: 1-877-536-7763 t www.lemproducts.com LEM Products t West Chester, OH 45011 t PH: 1-877-536-7763 t www.lemproducts.com
CAUTION
Before cleaning, assembling or disassembling meat slicer, make sure the slicer motor is OFF
and the plug is removed from the outlet/power source.
WARNING! SHARP BLADE
HANDLE CAREFULLY! KEEP FINGERS AWAY FROM THE CUTTING BLADE!
NEVER FEED FOOD BY HAND! ALWAYS USE THE FOOD PUSHER!
Always use completely assembled meat slicer with sliding food carriage and food pusher.
Protective/cut resistant gloves are recommended whenever handling blade!
WARNING! SHARP BLADE
HANDLE CAREFULLY! KEEP FINGERS AWAY FROM THE CUTTING BLADE!
NEVER FEED FOOD BY HAND! ALWAYS USE THE FOOD PUSHER!
Always use completely assembled meat slicer with sliding food carriage and food pusher.
Protective/cut resistant gloves are recommended whenever handling blade!
CAUTION
Cuts, injuries and/or re may result from non-compliance with all operating procedures
described within this instruction manual.
Before starting to clean slicer, switch unit “OFF”, remove unit from power source and set
Adjustment Knob to “0”. Never immerse the slicer in water.
SLICER FEATURES
SLICER SPECIFICATIONS
Power: 120V Power Rating: 120W
Slice Thickness: 0mm - 15mm / .6”
Blade Size: 19cm Dia., Reinforced, Stainless Steel Fine Blade
6
3
CLEANING AND MAINTENANCE
6
3
8
9
1 2 4
7
1
5
1
5
10
7
10
7
1 # Part Name QTY.
BLADE ASSEMBLY BLADE LOCKING SCREW SAFETY LOCK FOR POWER SWITCH BASE THICKNESS ADJUSTMENT KNOB POWER SWITCH SLIDING FEED TABLE FOOD PUSHER FOOD SUPPORT
2 3 4 5 6 7 8 9
FEED TABLE RELEASE BUTTON
10
SWITCH POWER TO “OFF” POSITION AND UNPLUG SLICER FROM OUTLET AND SET THE THICKNESS ADJUSTMENT KNOB (#5) TO “0” SETTING. Note: Always align Food Support (#9) with the Blade (#1) for safety and Blade protection during storage and maintenance. This is accomplished by returning the Thickness Adjustment Knob (#5) to the “0” position. 1. Unplug and allow the slicer to cool completely. 2. Remove the Food Pusher (#8) by simply sliding it away from the Food Support (#9) and o the Sliding Feed Table (#7) handle. 3. Remove the Sliding Feed Table (#7) by pressing the Feed Table Release Button (#10) and sliding the Feed Table to the left. After cleaning, return Sliding Feed Table (#7) back to the Slider by aligning the holes in the bottom of the Sliding Feed Table with the hooks on the Slider and pressing the Table to the right. 4. Remove the Blade; loosen the Blade Locking Screw (#2) by turning it in a clockwise direction. (LEM highly recommends wearing a cut resistant glove.) After cleaning, tighten the Blade (#1) with the Blade Locking Screw (#2) by turning in a counter clockwise direction. 5. Wash all removable parts in hot soapy water. Rinse and dry. 6. Wipe slicer body and Base (#4) with a damp cloth. Do not use abrasive cleaning agents or materials. Note: Failure to follow all cleaning instructions could allow harmful bacteria to grow and contaminate food, creating a serious health risk. 7. Feet can be cleaned with a gentle grease removing cleanser, such as alcohol or window cleaner. Note: Always align Food Support with Blade by returning the Thickness Adjustment Knob to the “0” position, for safety and blade protection during storage and maintenance.