Operator's Manual

5.1701.8500.0 -
Installation 6-1
6 Installation
6.1 Introduction
The installation process of the Lely Calm View has the following phases:
• • Prepare the installation.
• Install the Lely Calm View.
• Set up the Lely Calm View.
The installation is done by a Lely certified technician.
6.2 Preparation
6.2.1 Preparation by the Owner
Before the actual installation can start, a number of tasks should be done by the owner of the Lely Calm
View with support from the Lely service provider. These tasks are most of the construction tasks for the
farm and the purchase of equipment necessary to use the Lely Calm View:
• A decent internet speed is required to run the applications on the Lely View.
• Additional power supply (optional).
• CAN tag reader (optional).
• 2x mounting brackets for camera.
• 4x M6 bolts and nuts.
• Gigabit Ethernet cable (CAT 6 or CAT 6A) with Phoenix counterpart “1417443”.
• 5 core Power cable (AWG16) for +24V external adaptor with Phoenix counterpart “1543058”.
• 5 core signal cable (AWG22) for the CAN apparatus with Phoenix counterpart “1543003” .
• 5 core signal cable (AWG22) for the GPIO apparatus with Phoenix counterpart “1543003” .
• 1 Sealing cap for M12 plugs (Phoenix part 1560251).
• 3 Screw plugs for M12 sockets (Phoenix part 1680539).
in n o vato rs in agriculture