User Manual

English
9
boiler pressure. During the use of the machine,
this value can uctuate (between 1 and 2 bar).
STEAM DISPENSING
Before heating the beverage (water, milk, etc.),
open the steam knob for at least 2 seconds and
let the condense water come out of the wand.
COFFEE EXTRACTIONS
If the machine has not been used for more
than 15 minutes, the operator can set a
lower temperature than the normal usage
temperature. In the screen 16, you can set the
value between 110°C and 130°C (Pic. 8.5).
> 1 5 m
1 2 0 ° c
T e m p e r a t .
(8.5)
If the machine has not been used for more than
an hour, before making coffee, dispense about
100 cc of water through the extraction group.
HOT WATER DISPENSING
If the machine has not been used for more than
an hour, before using the hot water, dispense
about 200 cc.
CLEANING THE COFFEE CIRCUITS
Please read the specic section to learn more
about this.
ENERGY SAVING
You can enable the Energy Saving/Stand
by function in screen 19: if the machine has
not been used for more than 240 minutes, the
boiler temperature drops until it reaches the
default value, 110°C.
This last setting can be enabled or disabled,
without having the possibility to modify the
value of the set temperature.