User Manual

GiuliettaX - PL2SVX*
18
17.5 17.6
Use a PH2 Phillips screwdriver and remove the 3 xing screws of the cup warmer shelf (Pic.17.5).
Use a PH2 Phillips screwdriver and tighten the 8 M screws (part#MC268/I) present in the package to
x the sides of the cup warmer shelf (Pic.17.6).
Attention. The polished side of the shelf must face outwards (high).
17.7
To adjust/set the pump pressure, act on the screw
(10) after having loosen the locknut. By turning it
clockwise, the pressure increases, anticlockwise,
the pressure decreases. At the end tighten the
locknut (Pic.17.7).