User Manual
English
15
EN
Insert the blind lter in the lterholder.
Pour 3-5 gr of detergent powder (or 1 single bag of LELIT PLA9201) in the blind lter (Pic.15.1).
Hook the lterholder onto the grouphead and perform a washing cycle acting as described in
paragraph 13.2.
Remove the lterholder and clean the shower lter with a sponge.
Rinse by letting the hot water come out of each group for 30 seconds.
15.2 Filterholders cleaning
Pour 1 litre of warm water and 10 gr of detergent powder (or 3 single bags of LELIT PLA9201) into
a suitable basin.
Remove the lters from the lterholders.
Immerge and leave the lters and lterholders in the solution for at least 20 minutes.
Remove any residues with a sponge and rinse with plenty of warm water.
Place the lters in the lterholders, making sure that the lter xing spring is in the correct position.
15.3 Cleaning of the steam and hot water wands
Use a clean sponge to wash the wands with hot water and remove any eventual organic residue.
Rinse carefully.
To clean the steam nozzle inside, proceed as follows: turn the nozzle towards the cup tray and
carefully activate the steam dispensing at least once.
15.4 Cleaning of the water drip tray
Remove the drip tray and the relative grate and rinse both with tap water.
15.5 Cleaning of the water discharge tray
At the end of the working day, pour a jug of hot water into the discharge tray, removing any eventual
organic residue.
15.6 Cleaning of the appliance body
Use a soft cloth and cleaning products WITHOUT ammonia or abrasives to remove any eventual
organic residue in the work area. Do not spray liquids into the panel slots.
15.7 Cleaning of the coffee circuits – descaling
The descaling procedure must be performed regularly to ensure a stable performance of the machine
functions.
The frequency of the descaling cycle depends on the used water prole.
Contact your direct reseller/authorized installer for more details to program the correct descaling
frequency.