User Manual

GiuliettaX - PL2SVX*
12
13.1 Coffee dose programming
The machine has a selection/control panel for each extraction group:
K1GR1 K2GR1 K3GR1 K4GR1 K5GR1 K1GR2 K2GR2 K3GR2 K4GR2 K5GR2
13.2 13.3
Through the control panel it’s possible to perform the machine functions:
Button Function Special function
1 espresso +
1 coffee -
2 espressos
2 coffee
Continuous extraction
Enter programming/scroll screen/conrm
function
Reference Pic. 13.2
Button Function Special function
1 espresso
1 coffee
2 espressos
2 coffee
Continuous extraction
Reference Pic. 13.3
Before programming the coffee dispensing buttons ll the lterholder with the correct dose
of ground coffee. Don’t use coffee rests for programming the doses. It’s possible to modify
and save the doses (through volumetric control) by following the procedure described below:
1. To enter the programming mode: press one of the K5 buttons of any of the 2 groups and keep it
pressed for more than 5 seconds; the LED of the K5 button will blink on both selection panels (Pic.13.4).
2. Within 30 seconds (after 30 seconds you are out of the programming mode) press any of the 4
switches for the different doses (for example switch K1GRx). The relative led of K1GRx of the dose
you are programming and the LED of K5GRx will stay on (Pic.13.5).