User Manual

17
TRAINING OR CONFERENCE CALLS
5
If the secondary headset has Auto-On enabled, it will automatically connect
when you lift it from the base. If it has Auto-On disabled, press the
ON/OFF button (
1
) on the headset to connect.
NOTE: The secondary headset will remain registered to the base until the primary
headset is turned off or if either headset is returned to its original base. It takes about
ten seconds for the secondary headset to re-register to its original base.
*
Your Leitner headset can be conferenced with
any single or dual-ear Leitner wireless headset