User Guide

The Reserve & Renew® sanitizing system eliminates the need
for a floater, a brominator or the handling of dry chlorine.
Leisure Time® Reserve is a bromide salt that remains neutral
in the spa water until Leisure Time® Renew® granular is
added. The two products react with each other to form
active bromine. With proper maintenance and the regular
addition of Leisure Time® Renew® granular this system is
virtually maintenance-free.
APPLICATION
1. Add 4 ounces of Leisure Time® Reserve for every 250 gallons of
water. Wait 10 minutes and then add 4 ounces of Leisure Time®
Renew® granular for every 250 gallons of water to create a
bromine residual and shock-oxidize your water in one easy step.
2. Next, test the water again with Leisure Time® Spa & Hot Tub Test
Strips to ensure the spa’s pH and alkalinity levels are within proper
ranges. Remember an ideal pH level is between 7.2 – 7.8. The ideal
total alkalinity is between 80 – 120 ppm. The proper calcium level
is between 150 – 400 ppm and the sanitizer reading should be
between 1 – 3 ppm.
3. Once the water is balanced, the last step is to shock-oxidize
your spa water. During normal spa use, body oils, lotions and other
organic contaminants can enter the water. When these build up, the
water can become cloudy. To destroy these impurities, it is critical
to shock-oxidize your spa water. This can be accomplished by using
Leisure Time® Renew® granular or Leisure Time® Renew® Tabs. Be
sure to shock-oxidize your water on a routine basis, preferably after
each use. To shock-oxidize the water, keep the pump running and
add Leisure Time® Renew® granular or Leisure Time® Renew® Tabs
according to the directions on the label.
Your spa is now ready to enjoy. Just remember to shock-oxidize
your spa with Leisure Time® Renew® granular or Leisure Time®
Renew® Tabs after every use to keep the water clean, clear and
inviting.
Leisure Time® Spa designed the Leisure Time® Free System for
bathers who have sensitive skin or who otherwise choose not
to use traditional sanitizing methods. This 100% chlorine- and
bromine-free system is gentle on eyes, hair, skin and swimsuits.
It’s also virtually odor-free and controls bacteria longer than
chlorine or bromine. And because it doesn’t affect pH levels,
the Leisure Time® Free System requires less maintenance than
traditional sanitizing systems, leaving you with more time to
enjoy your spa.
APPLICATION
1. Once you’ve cleaned the surface of the spa, fill it with water and
add Control to prevent staining and scaling. Ensure that you shake
the bottle before adding and follow label instructions to add the
correct amount to the water.
2. Add Boost non-chlorine shock oxidizer. Boost non-chlorine
shock oxidizer is an oxidizer specially designed to keep spa water
sparkling clear. Add 3 ounces of Boost non-chlorine shock oxidizer
for every 150 gallons of spa water.
3. Once Boost non-chlorine shock oxidizer is added, circulate the
water for at least 15 minutes on high speed. Next add the Leisure
Time Free® sanitizer according to label directions and circulate the
water again for 15 minutes.
4.
Finally, test the water with Leisure Time® Spa & Hot Tub Test Strips
to ensure you have achieved the proper water balance. Your pH
should read between 7.2 – 7.8. The alkalinity should be in the range
of 80 – 120 ppm and the calcium hardness should range between
150 – 400 ppm. Your sanitizer level should be between 30 – 50 ppm.
Your spa is now ready to enjoy. Just remember to add Control and
Boost non-chlorine shock oxidizer weekly, per label directions. You
will add Leisure Time Free® sanitizer only as needed, based upon
your test strip results.
RESERVE & RENEW® SYSTEM FREE SYSTEM
8 9
[Your spa is now ready to enjoy!]