User Manual

Like any luxury item, whether it is a car, a boat or even a second home,
you must maintain it in order to enjoy it. Even though maintenance is
important, you bought your spa to relax. That’s why Leisure Time Spa
developed the quickest and easiest-to-follow weekly spa care program
available. Best of all, these steps only take 10 minutes to complete!
For best results, follow these steps on the same day every week. Refer
to each product’s label for dosage amounts. To ensure the adequate
distribution of chemicals, ensure that jets are on when adding product to
the water.
Day 1
On the rst day of the three-day program, test your spa water. Use
Leisure Time® Spa & Hot Tub Test Strips to measure the pH, total
alkalinity and sanitizer levels. If they fall outside the proper ranges,
adjust the water with Leisure Time
®
Spa Up, Leisure Time
®
Spa Down,
Leisure Time
®
Alkalinity Increaser and sanitizer of your choice as
needed.
This is also the time to add Bright & Clear. Specially designed for use in
hot water, Bright & Clear will clear cloudy water and add sparkle.
Day 2
On the second day of the program, add Defender. This is a sequestering
agent that will suspend and inactivate stain and scale-causing minerals
found in spa water. After a few minutes, add Enzyme. This enzyme
cleaner reduces spa maintenance by breaking down oils, lotions and
organic materials that cause odors, scum lines and cloudy water.
Day 3
On the third day of the program, shock-
oxidize your water with Leisure Time
®
Renew
®
granular or Leisure Time
®
Renew
®
Tabs following product label
directions. Remember that regularly
shock-oxidizing your spa water as
recommended is the best way to prevent
organic and inorganic materials from
causing unsightly problems.
If you are using the Leisure Time
®
Free System, use Control, Boost and
Free sanitizer to treat the water weekly according to label directions.
SIMPLE SPA CARE
®
PROGRAM
~ 10 ~ ~ 11 ~