User Manual

~ 8 ~ ~ 9 ~
Leisure Time Spa designed the Leisure Time
®
Free System for
bathers who have sensitive skin or who otherwise choose not
to use traditional sanitizing methods. This 100% chlorine- and
bromine-free system is gentle on eyes, hair, skin and swimsuits.
It’s also virtually odor-free and controls bacteria longer than
chlorine or bromine. And because it doesn’t affect pH levels,
the Leisure Time
®
Free System requires less maintenance than
traditional sanitizing systems, leaving you with more time to
enjoy your spa.
APPLICATION
1
Once you’ve cleaned the surface of the spa, ll it with water and add
Control to prevent staining and scaling. Ensure that you shake the bottle
before adding and follow label instructions to add the correct amount to
the water.
2
Add Boost non-chlorine shock oxidizer. Boost non-chlorine shock
oxidizer is an oxidizer specially designed to keep spa water sparkling
clear. Add 3 ounces of Boost non-chlorine shock oxidizer for every 150
gallons of spa water.
3
Once Boost non-chlorine shock oxidizer is added, circulate the water
for at least 15 minutes on high speed. Next add the Leisure Time Free®
sanitizer according to label directions and circulate the water again for
15 minutes.
Finally, test the water with Leisure Time® Spa & Hot Tub Test Strips
to ensure you have achieved the proper water balance. Your pH should
read between 7.2 – 7.8. The
alkalinity should be in the range
of 80 – 120 ppm and the calcium
hardness should range between
150 – 400 ppm. Your sanitizer
level should be between 30 – 50
ppm.
Your spa is now ready to enjoy as
often as you’d like. Just remember
to add Control and Boost non-
chlorine shock oxidizer weekly,
per label directions. You will add
Leisure Time Free® sanitizer only as needed, based upon your test strip
results.
FREE SYSTEM
4