User Manual

The Reserve & Renew® sanitizing system eliminates the need for a
oater, a brominator or the handling of dry chlorine. Leisure Time
®
Reserve is a bromide salt that remains neutral in the spa water until
Leisure Time
®
Renew
®
granular is added. The two products react with
each other to form active bromine. With proper maintenance and the
regular addition of Leisure Time
®
Renew
®
granular this system is
virtually maintenance-free.
APPLICATION
1
Add 4 ounces of Reserve for every 250 gallons of water. Wait 10
minutes and then add 4 ounces of Leisure Time
®
Renew
®
granular
for every 250 gallons of
water to create a bromine
residual and shock-oxidize
your water in one easy step.
2
Next, test the water
again with Leisure Time®
Spa & Hot Tub Test Strips
to ensure the spa’s pH and
alkalinity levels are within
proper ranges. Remember
an ideal pH level is between
7.2 – 7.8. The ideal total
alkalinity is between
80 – 120 ppm. The proper calcium level is between 150 – 400 ppm
and the sanitizer reading should be between 1 – 3 ppm.
3
Once the water is balanced, the last step is to shock-oxidize your
spa water. During normal spa use, body oils, lotions and other organic
contaminants can enter the water. When these build up, the water can
become cloudy. To destroy these impurities, it is critical to shock-
oxidize your spa water. This can be accomplished by using Leisure
Time
®
Renew
®
granular or Leisure Time
®
Renew
®
Tabs. Be sure to
shock-oxidize your water on a routine basis, preferably after each use.
To shock-oxidize the water, keep the pump running and add Leisure
Time
®
Renew
®
granular or Leisure Time
®
Renew
®
Tabs according to
the directions on the label.
Your spa is now ready to enjoy as often as you’d like. Just remember to
shock-oxidize your spa with Leisure Time
®
Renew
®
granular or Leisure
Time
®
Renew
®
Tabs after every use to keep the water clean, clear and
inviting.
RESERVE & RENEW® SYSTEM
~ 8 ~