Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope Version: V1.0 Date: 2018.04.24 2018-04-24 深圳市镭神智能系统有限公司 Leishen Intelligent System Co.,LTD.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 History of modification Version Date of modification Contents of modification Modified by V1.0 2018.04.24 Initial version GUO Fengshou 2018-04-24 深圳市镭神智能系统有限公司 Leishen Intelligent System Co.,LTD.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 Contents 1 2 3 4 5 6 7 8 Overview..................................................................................................................................... 4 Introduction to Product............................................................................................................... 4 2.1 Operating principle, function and scope of application..................................................4 2.1.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 1 Overview The document specifies the requirements and methods to use and maintain LS-FOG-01 Uniaxial optical fiber gyroscope (“gyroscope”). 2 Introduction to Product 2.1 Operating principle, function and scope of application 2.1.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 Dimension (mm): 70×70×29(W X L X H); Mounting dimension: （62±0.1）×（62±0.1）(W X L) , Ø4mm × 4; See Fig. 1 below for details Fig. 1 Sketch Map of Outline and Mounting of LS-FOG-01 Uniaxial optical fiber gyroscope 2.4 Weight The gross weight of the product is less than 200g. 2.5 Main performance parameters See Table 1,2 for main performance parameters and see Table 3 for common parameters.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 Table 1 Main Performance Parameters Name LS-FOG-01A LS-FOG-01B LS-FOG-01C LS-FOG-01D ±1000(º)/s ±1000(º)/s ±1000(º)/s ±1000(º)/s 1(º)/h~3(º)/h 0.3(º)/h~1(º)/h 0.1(º)/h~0.5(º)/h 0.3(º)/h~1(º)/h 1(º)/h~3(º)/h 0.3(º)/h~1(º)/h 0.1(º)/h~0.5(º)/h 0.3(º)/h~1(º)/h ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm ≤100 ppm 6.06g(RMS),20H z~2000Hz 6.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 Table 3 Performance Parameters S/N Test item Unit Technical requirements 1 Working temperature ℃ -40~+60 2 Stock temperature ℃ -50~+70 3 Dynamic range (°)/s ±1000 4 Power consumption at stable state V +5V 5 Steady state power consumption W <4 2.6 Relation of mechanical and electrical interface 2.6.1 Requirements of power supply The product is powered by +5 DC electrical source.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope 9 SEL+ V1.0 Gyro strobe power supply Note: Gyro strobe power is connected to +5V and the strobe signal is TTL level. Note: When connecting or contacting the product, please take anti-static precautions according to GJB1649-1993. 2.6.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 Users are responsible for assembly and disassembly of the products. Bumping or machining on surface of the Product should be avoided during assembly and disassembly. 3.2 Methods and steps Here are the methods and steps: a) The surface used to fix the product requires the flatness better than 0.02mm; b) It is recommended that a layer of 0.2-0.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope c) V1.
Instruction of LS-FOG-01 Series Uniaxial Optical Fiber Gyroscope V1.0 7 Requirements of Transportation and Storage 7.1 Precautions of transportation Precautions of transportation: a) Place the product at the direction indicated on the packaging box; b) Transportation by highway, railway, air and water is allowed; c) Ensure that the packaging box is fixed on the carrier during transportation. 7.
