Install Manual

Table Of Contents
Leidos Proprietary
IP, ProVision2 to ProVision3
System Upgrade
8000-35512-IP
Rev A1
Leidos Security Detection & Automation, Inc. – Proprietary Page 8 of 26
7.6.5 Using the existing 48VDC distribution cable removed from the connector in step 7.4.2. [1200-
26805-00 or 1200-12288-00], strip back the insulation 10-mm ± 1-mm.
Figure 8 – Strip Cables
7.6.6 Carefully insert ends of the cables cut from the connector in step 7.4.2 into the terminals included
with the Power Supply Assembly [1000-30982-00]. Insert the +48V cable (red) into the terminal
labeled (+48V) and the -48V cable (black) into the terminal labeled (-48V). Refer to connector
documentation (0300-32100-00) if unfamiliar with this connector type.