Installation Guide

Step 1
Fasten the seat frame onto chair back. Make sure the
“UP” sticker on the seat frame is upright. Do not
tighten.
Step 2
Place the chair assembly upside down on a table.
Insert two side stretchers into back leg holes. Make
sure the “L” and “R” stickers on the bottom of
stretcher should be connected to back legs. Also,
make sure the front leg sticker matches the sticker on
the seat frame before attaching two front legs.
Tighten bolts when all stretchers in place and all legs
are properly leveled.
Step 3
Fasten the stretchers and legs with screws. And fasten the seat pad through seat frame holes with screws.
2/2