Installation Guide

Thank you for purchasing Leick Furniture products.

Contact customer service for comments or concerns.

Sheboygan, WI 920-451-4060 info@leickhome.com www.leickhome.com

Assembly Instructions, #10084

Double Cross Back 24” Counter Height Stool

1/2

A: Chair Back

B: Seat Frame

C: (2) Side Stretchers L & R

D: Front Stretcher

E: (2) Front Legs

F: Seat Pad

G: Bolt 1/4＂*1-3/4＂

H: (4) Bolts 1/4＂*2-1/4＂

I: (4) Bolts 1/4＂*3-1/4＂

J: (9) Lock Washers

K: (9) Flat Washers

L: (10) Screws 8*1-1/2＂

M: Allen Wrench

PAGE 1
Thank you for purchasing Leick Furniture products. Contact customer service for comments or concerns. Sheboygan, WI 920-451-4060 info@leickhome.com www.leickhome.
PAGE 2
Step 1 Step 2 Fasten the seat frame onto chair back. Make sure the “UP” sticker on the seat frame is upright. Do not tighten. Place the chair assembly upside down on a table. Insert two side stretchers into back leg holes. Make sure the “L” and “R” stickers on the bottom of stretcher should be connected to back legs. Also, make sure the front leg sticker matches the sticker on the seat frame before attaching two front legs. Tighten bolts when all stretchers in place and all legs are properly leveled.