Technical data

23
SETTING THE UNIT OF MEASURE
The LEICA PINMASTERcan be set to meters or yards,
the more commonly used unit in the USA.
Setting:
1. Briefly press (<3s) the main button (2).
• The target mark appears.
2. Press and hold (≥3s) the secondary button (1).
• EU.US appears below the target mark.
3. Briefly press the main button.
• EU disappears, the target mark and US continue
to flash.
4. Select your preferred units of
measure by (repea-
t
edly) pressing the secondary button. US stands
for the unit yards, EU for meters.
• The respective displays continue to flash.
5. Save your setting by briefly pressing the main but-
ton.
• The saved setting and the target mark light up
continuously for 2 seconds for confirmation and
then disappear.
Notes:
• The current setting can always be seen in the
display - if meters are selected, a do
t appears to
t
he bottom right of the target mark.
• Concerning the setting process: The displays
disappear 3 seconds after you last press one of
the two buttons. The previously saved setting is
retained.
Inhalt Pinmaster_933-05.qxp:Inhalt Rangemaster.qxp 06.10.2010 15:09 Uhr Seite 23