Technical data

81
Film type
1
Film speed Exposure Viewfinder displays Value used
loaded setting compensation for exposure
set first 2s remaining 14s
2
metering
DX DX No DX value exp. met. display DX value
Yes DX value flashes exp. met. display, result. value (DX+
lower pt. flashes exp. comp. value)
DX No DX value exp. met. display, DX value
Yes DX value flashes exp. met. display, result. value (ISO-+
lower pt. flashes exp. comp. value)
DX manual, No/Yes DX value flashes
3
exp. met. display, set / result. value
not equal to DX value lower pt. flashes (ISO -+ exp. comp.
value
non-DX manual No set value exp. met. display, set value
lower pt. flashes
Yes result. value
4
exp. met. display, result. value (ISO-+
lower pt. flashes exp. comp. value)
non-DX DX No/Yes "
110000
" flashes exp. met. display, ISO 100 / result.
lower pt. flashes value (100+ exp.
comp. value
DX or non-DX incorrect, between Yes/No "
AASSAA
" flashes "
AASSAA
" flashes ISO 100
the sections
manual,
equal to DX value
The set, displayed and used film speed
1
Non-DX also applies to DX-coded films, for which the camera cannot read the
DX identification, e.g. due to damage or soiling.
2
Different displays at low battery power (see also the section "Automatic
battery check” on p. 72 for details).
3
Does not flash if set ISO-speed plus compensation value equals DX-value.
4
High speed values along with the compensations may result in effective ISO
values greater than 8 000 (e.g. ISO 6 400/39° +
2
/
3
EV => ISO 10000/41°),
i.e. five-digit values, that cannot be shown by the four-digit display. In such
cases, the first four digits of the resulting value are shown, with the right ze-
ro flashing to show that there is a "missing” zero, e.g. for the above example
"
11 0000
00
”.