Technical data

68
Nomenclature
0 1. Base plate holding pin
02. Battery compartment cover
03. Lens release button
04. Eyelets for carrying strap
05. Red button for lens alignment
06. Release lever for film rewinding
07. Automatic frame counter
08. Shutter release button with threaded socket
for cable release
09. Main switch
10. Quick-wind lever for advancing the film and
cocking the shutter (is set to stand-by posi-
tion when shooting)
11. Shutter speed dial with clickstops for:
• Manually adjustable shutter speeds from
4s to 1/1000s, inc. two mechanically con-
trolled speeds - 1/60s and 1/125s, which
are available at any time, i.e. even without
battery power,
• "" for 1/50s synchronising speed for
flash operation
• "B" for long time exposures
• "AUTO" for aperture priority automatic
exposure mode (with manual aperture
pre-selection) with shutter speeds from
32s to 1/1000s
12. Rangefinder window
13. Accessory shoe for flash control with:
• Central (triggering) and
• Control contacts
14. Bright-line frame illumination window
15. Angled rewind crank
16. Viewfinder window with mirrored strips for im-
proved LED visibility in bright light and en-
graved viewfinder magnification factors
17. Fixed ring with index for focusing, alignment
button for changing lenses and depth of
field scale
18. Focusing ring
19. Aperture ring
20. White index dot for aperture setting
21. Frame selector
22. Viewfinder eyepiece
23. Socket for connecting flash units with cord
24. Camera back
25. Tripod bushing A
1
/
4
, DIN 4503 (
1
/
4
")
26. Base plate
27. Exposure compensation scale with range of
±2EV in
1
/
3
EV steps
28. Exposure compensation ring with white in-
dex dot
29. Film speed dial with:
• ISO speed values from 6 to 6400 and
• DX position for automatic setting from
ISO 25/15° to ISO 5000/38°