User's Manual

Remove the battery
19544_001
2
1
1
1. Slide the locking mechanism of the battery to the open position.
2. Lift the battery and remove it from the compartment.
Insert the battery
19545_001
2
2
1
1
1. Attach the upper side of the battery to the compartment at an angle
and then lower the bottom side.
☞
Ensure that the battery contact slots are facing inwards.
2. Slide the locking mechanism of the battery to the lock position to
secure the battery in the compartment.
☞
The IP rating is only ensured if the battery is attached cor-
rectly.
Remove and insert
the battery
step-by-step
24 Power Supply